Paper Code | Title | Authors |
---|
Tu-A06-TO/1 | Active Vibration Rejection in Steel Rolling Mills | Schlacher Kurt, Fuchshumer Stefan, Grabmair Gernot, Holl Johann, Keintzel Georg |
Tu-A06-TO/2 | Advanced Tension Control Based on State Feedback For Reversing Mills | Asano Kazuya, Takahashi Hiroyuki, Miyata Takeshi, Kohiro Yoshitake |
Tu-A06-TO/3 | Modeling and Control of Plate Thickness in Hot Rolling Mills | Kugi Andreas, Heeg Roland, Fichet Olivier, Irastorza Laurent, Pelletier Christophe |
Tu-A06-TO/4 | VSS Control of Strip Steering for Hot Rolling Mills | Okada Masayasu, Murayama Kaoru, Anabuki Yoshinori, Hayashi Yoshitaka |
Tu-A06-TO/5 | Bayes for Rolling Mills: From Parameter Estimation to Decision Support | Ettler Pavel, Karny Miroslav, Guy Tatiana Valentine |
Tu-E18-TO/1 | A Hybrid Approach to Tension Control in Hot Rolling | Asano Kazuya, Tsuda Kazuro, Imura Jun-ichi, Kojima Akira, Masuda Shiro |
Tu-E18-TO/2 | A Survey of the Looper-Tension Control Technology in Hot Rolling Mills | Choi Il Seop, Rossiter Anthony, Fleming Peter |
Tu-E18-TO/3 | Fault Diagnosis of Roll Shape under the Speed Change in Hot Rolling Mill | Shin Kee Hyun, Lee Chang Woo, Kang Hyun Kyoo, Park Cheol Jae |
Tu-E18-TO/4 | Input Selection Technology of Neural Network and its Application for Hot Strip Mill | Park Cheol Jae, Lee Duk Man |
Tu-E18-TO/5 | Nonlinear Control of the Interstand Looper in Hot Strip Mills: a Backstepping Approach | Cuzzola Francesco A., Parisini Thomas |
Tu-E18-TO/6 | Coiler Control in Endless Hot Strip Rolling | Motomura Takashi, Ueda Kiyoshi, Imazeki Toshio, Fukui Yoshimitsu, Yahiro Kazuhiro |
Tu-M03-TP/1 | Analysis of Two-layer Sintering Process for Different Bed Heights by Genetic Algorithm | Mitra Kishalay, Nath Niloy K. |
Tu-M03-TP/2 | Analysis of errors of coal quality monitors | Cierpisz Stanislaw |
Tu-M03-TP/3 | Application of Grey Relation Analysis and RBF Network on Grinding-concentration’s Soft Sensing | Li Yong, Shao Cheng |
Tu-M03-TP/4 | Control of crushing circuits with variable speed drives | Sbarbaro Daniel |
Tu-M03-TP/5 | Detecting abnormal feed rate in aluminium electrolysis using extended Kalman filter | Hestetun Kristin, Hovd Morten |
Tu-M03-TP/6 | Development Issues on the Life-cycle Management of Mineral Grinding Processes and Equipment | Remes Antti, Suontaka Ville, Saloheimo Kari, Jämsä-Jounela Sirkka-Liisa |
Tu-M03-TP/7 | Development of Visual Evaluation and Numerical Analysis System of Blast Furnace | Matsuzaki Shinroku, Ito Masahiro, Kakiuchi Kazumoto, Iosbe Makoto |
Tu-M03-TP/8 | Development of middleware for software of UNIX based control system | Hwang Hwawon, Kim Yongsoo |
Tu-M03-TP/9 | End-point Temperature Prediction based on RBF Neural Network | Deng Changhui, Wang Shu, Mao Zhizhong, Wang Fuli |
Tu-M03-TP/10 | Fault Detection Based on Probabilistic Robustness Techniques for Belt Conveyor Systems | Sader Mario, Noack René, Zhang Ping, Ding Steven X., Jeinsch Torsten |
Tu-M03-TP/11 | Fault Diagnosis Expert System using Neural Networks for Roasting Process | Yan Ai-jun, Wu Feng-hua, Chai Tian-you |
Tu-M03-TP/12 | Fuzzy Neuron Hybrid Control for Continuous Steel Casting | Tao Jili, Wang Ning |
Tu-M03-TP/13 | Fuzzy Predictive Control of a Column Flotation Process | Vieira Susana, Sousa João, Durão Fernando |
Tu-M03-TP/14 | Integrated Automation System of Minerals Processing and its Applications | Chai Tianyou, Ding Jinliang, Zhao Dayong, Yan Aijun |
Tu-M03-TP/15 | Integrated Quality Control for Looper System by Adaptive Technique | Kitamura Akira, Asada Hideki, Konishi Masami |
Tu-M03-TP/16 | Java-based Integrating Simulator for Blast Furnace | Koga Masanobu, Ogawa Masatoshi, Ogai Harutoshi, Ito Masahiro, Uchida Kenko, Matsuzaki Shinroku |
Tu-M03-TP/17 | MPC control of the refining stage of an electric arc furnace | Coetzee L.C., Craig I.K., Rathaba L.P. |
Tu-M03-TP/18 | Minimum Number of Sampled Streams Ensuring Circuit Mass-Balance | Konstantinos Tsakalakis, Fani Kalaitzi |
Tu-M03-TP/19 | Modeling of Wet Grinding Operation using Artificial Intelligence based Techniques | Mitra Kishalay, Ghivari Mahesh |
Tu-M03-TP/20 | Mould Level Control for the Continuous Steel Casting | Smutný Lubomír, Farana Radim, Víteček Antonín, Kačmář Dalibor |
Tu-M03-TP/21 | Nonlinear Modelling and Simulation of Industrial Wet Grinding Process | Barve Jayesh, Mitra Kishalay, Junnuri V.S.S. Rameshkumar |
Tu-M03-TP/22 | Product Quality Improvement Using Multivariate Data Analysis | Kano Manabu, Fujiwara Koichi, Hasebe Shinji, Ohno Hiromu |
Tu-M03-TP/23 | The Architecture of Manufacturing Execution System in Iron & Steel Enterprise | Li Huiying, Pang Xinfu, Zheng Binglin, Chai Tianyou |
We-A21-TO/1 | High Productivity Improvement in JFE Fukuyama No.1 Hot strip Mill | Yokota Shuji, Sekine Hiroshi, Mugita Hisashi, Tsuchiya Yoshiro, Aimoto Koji |
We-A21-TO/2 | Pass Schedule Optimization for a Tandem Cold Mill | Murakami Akira, Nakayama Makishi, Okamoto Mitsuo, Sano Kenichi, Tsuchihashi Tomoya, Abiko Yoji |
We-A21-TO/3 | Sliding Mode Force Control during Drawing Processes in Presses | Landaluze Joseba, Goikoetxea Josu, Pujana Aron, Nicolas Carlos F., Martinez Ana |
We-A21-TO/4 | Granular Computing and Evolutionary Fuzzy Modelling for Mechanical Properties of Alloy Steels | Mahfouf Mahdi, Panoutsos George |
We-A21-TO/5 | Multi-Objective Particle Swarm Optimisation for Alloy Toughness Design using a Fuzzy Predictive Model | Mahfouf Mahdi, Chen Minyou, Linkens Derek A |
We-A21-TO/6 | An Improved Friction Sliding Model for Web Handling Systems. Application to the Controller Parametrization | Vedrines Marc, Knittel Dominique |
We-A22-TO/1 | Optimization-free constrained nonlinear predictive control - Mineral processing applications | Desbiens André, Bouchard Jocelyn, del Villar René |
We-A22-TO/2 | Dynamic modeling of an industrial copper solvent extraction process | Komulainen Tiina, Rantala Ari, Jämsä-Jounela Sirkka-Liisa |
We-A22-TO/3 | Image Analysis Based Control of Copper Flotation | Kaartinen Jani, Hätönen Jari, Larinkari Martti, Hyötyniemi Heikki, Miettunen Jorma |
We-A22-TO/4 | Economical Effects of On-line Elemental Analysis Performance on Flotation Control | Remes Antti, Kongas Matti, Saloheimo Kari, Jämsä-Jounela Sirkka-Liisa |
We-A22-TO/5 | Robust Statistics for Soft Sensor Development in Cement Kiln | Lin Bao, Recke Bodil, Renaudat Philippe, Knudsen Jørgen, Jørgensen Sten Bay |
We-A22-TO/6 | Control Loop Performance Measures in the Evaluation of Process Economics | Vatanski Nikolai, Jämsä-Jounela Sirkka-Liisa, Rantala Ari, Harju Timo |
We-M22-TO/1 | Application of Large scale Database-based Online Modelling on Blast Furnace Operation | Ito Masahiro, Matsuzaki Shinroku, Ogai Harutoshi, Mori Kenichi, Uchida Kenko, Saito Shinichi, Sasaki Nozomi |
We-M22-TO/2 | Fuzzy Neural Network's Application in Furnace Temperature Compensation Based on Rolling Information Feedback | Zhang Kaiju, Jin Di, Shao Cheng |
We-M22-TO/3 | Modern Automation Technology in Service of Integrated Stainless Steel Mill | Yli-Niemi Jussi, Pakola Hannu |
We-M22-TO/4 | Data Classification in Temperature Modelling of LD-KG Converter | Ruuska Jari, Ollila Seppo, Leiviskä Kauko |
We-M22-TO/5 | Diagnosis and Control Strategy for a Teniente Converter | Bergh Luis, Chacana Patricio, Carrasco Claudio |
We-M22-TO/6 | Optimal Control of the Sintering Process | Koštial Imrich, Dorčák Ľubomír, Terpák Ján |
Th-M21-TO/5 | POSCO Yard Crane Automation | Won Sangchul, Kim Sang-un, Choi Seung-Gap, Choi Chintae |