Predefined Cameras and Targets¶
A text file containing all predefined cameras and calibration targets should be located here:
C:\Users\username\AppData\Local\SIMLab\eCorr\settings\ePrimitives.epCameraModel.eCalibrationProps
This text file may be created and edited by the user. There are two keywords (*Cameras and *CalibrationTargets) and an example is provided below.
*Cameras¶
Each line provide the following information:
- Camera Name
- Horizontal pixel size [mm]
- Vertical pixel size [mm]
*CalibrationTargets¶
Each line provide the following information:
- Target Name
- Type (Cylinder or Plate)
- Diameter (Only for cylinders)
- Horizontal checkerboard unit cell size [mm]
- Vertical chekerboard unit cell size [mm]
Example¶
*Cameras
"AVT Prosilica GC2450" 3.45e-3 3.45e-3
"Phantom v1610" 28.0e-3 28.0e-3
"GoPro Hero4 Black" 1.55e-3 1.55e-3
"Canon EOS 600D" 4.3e-3 4.3e-3
*CalibrationTargets
"SIMLab Cylinder ?80mm Fine" Cylinder 80 3.265 3.265
"SIMLab Cylinder ?80mm Coarse" Cylinder 80 13.0548 13.0548
"Cylinder ?200mm" Cylinder 201 18.63 18.63
"Cylinder ?111mm" Cylinder 111.4 19.06 19.06
"Plate" Plate 19.4875 19.4875