.. toctree::
    :maxdepth: 2
	
Predefined Cameras and Targets
=================================

A text file containing all predefined cameras and calibration targets should be located here:

C:\\Users\\username\\AppData\\Local\\SIMLab\\eCorr\\settings\\ePrimitives.epCameraModel.eCalibrationProps

This text file may be created and edited by the user. 
There are two keywords (*Cameras and *CalibrationTargets) and an example is provided below.

*Cameras
--------
Each line provide the following information:

* Camera Name
* Horizontal pixel size [mm]
* Vertical pixel size [mm]

*CalibrationTargets
--------------------
Each line provide the following information:

* Target Name
* Type (Cylinder or Plate)
* Diameter (Only for cylinders)
* Horizontal checkerboard unit cell size [mm]
* Vertical chekerboard unit cell size [mm]

Example
-------


.. code::

	*Cameras
	"AVT Prosilica GC2450"			3.45e-3		3.45e-3
	"Phantom v1610"				28.0e-3		28.0e-3	
	"GoPro Hero4 Black"			1.55e-3		1.55e-3
	"Canon EOS 600D"			4.3e-3		4.3e-3

	*CalibrationTargets
	"SIMLab Cylinder Ø80mm Fine"		Cylinder	80		3.265		3.265
	"SIMLab Cylinder Ø80mm Coarse"		Cylinder	80		13.0548		13.0548
	"Cylinder Ø200mm"			Cylinder	201		18.63		18.63
	"Cylinder Ø111mm"			Cylinder	111.4		19.06		19.06
	"Plate"					Plate		19.4875		19.4875