IFAC WC 2008 Technical Program Monday July 7, 2008
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
Track 7
Track 8
Track 9
Track 10
Track 11
Track 12
Track 13
Track 14
Track 15
Track 16
Track 17
Track 18
Track 19
Track 20
Track 21
Track 22
Track 23
Track 24
Track 25
Track 26
Track 27
Track 28
Track 29
Track 30
Milestone
08:00-09:00 MoPL1 Auditorium (301) Reduced Complexity Control Systems
09:00-10:00 MoPL2 Auditorium (301) Overview of Potential Evolutions of Technologies Applied in Commercial Transport Airplanes
10:30-12:30 MoA01 Atlantic Hall Automotive & Manufacturing Systems
10:30-12:30 MoA02 304A Nonlinear H_infty Control and Disturbance Rejection
10:30-12:30 MoA03 304B Geometric Control
10:30-12:30 MoA04 308 Time Delay Systems
10:30-12:30 MoA05 307 Identification in Systems Biology: Methods and Applications
10:30-12:30 MoA06 310A Plug and Play Process Control
10:30-12:30 MoA07 310B Control of Time Invariant Linear Systems
10:30-12:30 MoA08 310C Probabilistic Robustness
10:30-12:30 MoA09 311C Identification of Dynamic Errors-In-Variables Models
10:30-12:30 MoA10 311B Prediction, Filtering and Smoothing I
10:30-12:30 MoA11 311A Nonlinear Systems I
10:30-12:30 MoA12 313 Discrete Event Systems and Petri Nets
10:30-12:30 MoA13 314 Distributed Control and Coordination
10:30-12:30 MoA14 318 Networked Systems: Sensing, Estimation, Consensus and Control Over Networks
10:30-12:30 MoA15 317 Monitoring & Sensing in Agriculture
10:30-12:30 MoA16 316 Economic and Management Systems I
10:30-12:30 MoA17 320A Steel Making
10:30-12:30 MoA18 320B Ubiquitous Robotic Companion
10:30-12:30 MoA19 320C Robotic Mechanism I
10:30-12:30 MoA20 321C Flying Robot I
10:30-12:30 MoA21 321B Servo Control for Storage Systems and Precision Devices I
10:30-12:30 MoA22 321A Design and Control of Mechatronic Machines
10:30-12:30 MoA23 323 Large Scale and Complex Systems: Applications I
10:30-12:30 MoA24 324 Control and Monitoring of Semiconductor Manufacturing
10:30-12:30 MoA25 328 Applications of Nonlinear Optimization Based and Predictive Control
10:30-12:30 MoA26 327 Cold Rolling and Tension Control
10:30-12:30 MoA27 326
10:30-12:30 MoA28 330A Benchmark for Engine Cold Start
10:30-12:30 MoA29 330B Model-Based Development for Automotive Control Systems
10:30-12:30 MoA30 330C Low Altitude Flight and Landing Control
14:00-16:00 MoB01 Atlantic Hall
14:00-16:00 MoB02 304A Stability Analysis
14:00-16:00 MoB03 304B Control of Constrained Systems I
14:00-16:00 MoB04 308 Applications of Nonlinear Control I
14:00-16:00 MoB05 307 Fault-Tolerant Control I
14:00-16:00 MoB06 310A Tools and Methods in Time-Delay System Theory and Control
14:00-16:00 MoB07 310B Linear Systems Analysis
14:00-16:00 MoB08 310C LMIs and Algebraic Methods in Control
14:00-16:00 MoB09 311C Errors in Variables Identification
14:00-16:00 MoB10 311B Prediction, Filtering and Smoothing II
14:00-16:00 MoB11 311A Nonlinear Systems II
14:00-16:00 MoB12 313 Iterative Learning Control I
14:00-16:00 MoB13 314 Distributed Estimation and Consensus I
14:00-16:00 MoB14 318 Control and Synchronization of Networks
14:00-16:00 MoB15 317 Mechatronics in Agriculture
14:00-16:00 MoB16 316 Economic and Management Systems II
14:00-16:00 MoB17 320A Hot Rolling
14:00-16:00 MoB18 320B Recent Development of Intelligent Robots I: Navigation
14:00-16:00 MoB19 320C Robotic Mechanism II
14:00-16:00 MoB20 321C Flying Robot II
14:00-16:00 MoB21 321B Servo Control for Storage Systems and Precision Devices II
14:00-16:00 MoB22 321A Control Methods for Mechatronic Systems
14:00-16:00 MoB23 323 Large Scale and Complex Systems: Applications II
14:00-16:00 MoB24 324 Fault Detection and Accommodation for Nonlinear Systems
14:00-16:00 MoB25 328 New Theoretical Results and Numerical Methods in Optimization Based Control
14:00-16:00 MoB26 327 Furnace Control
14:00-16:00 MoB27 326 Precision Systems and Friction Modeling/Control
14:00-16:00 MoB28 330A Engine Modeling, Diagnostics and Control
14:00-16:00 MoB29 330B New Trends in Chassis Control and Supervision
14:00-16:00 MoB30 330C Formation Flight
14:00-16:00 MoBCC 401 Milestone Report by IFAC Coordinating Committee on Design Methods (CC2)
16:30-18:30 MoC01 Atlantic Hall Mechatronics & Computers
16:30-18:30 MoC02 304A Stability of Nonlinear Systems
16:30-18:30 MoC03 304B Control of Constrained Systems II
16:30-18:30 MoC04 308 Applications of Nonlinear Control II
16:30-18:30 MoC05 307 Fault-Tolerant Control II
16:30-18:30 MoC06 310A Time Delay Systems: Stability Analysis
16:30-18:30 MoC07 310B Control Problems under Conflict or Uncertainties
16:30-18:30 MoC08 310C Observer and Robust Estimator Synthesis
16:30-18:30 MoC09 311C Nonlinear System Identification I
16:30-18:30 MoC10 311B Prediction, Filtering and Smoothing III
16:30-18:30 MoC11 311A Nonlinear Systems III
16:30-18:30 MoC12 313 Iterative Learning Control II
16:30-18:30 MoC13 314 Distributed Estimation and Consensus II
16:30-18:30 MoC14 318 Control of Networks
16:30-18:30 MoC15 317 Greenhouses and Controlled Agricultural Production
16:30-18:30 MoC16 316 Economic and Management Systems III
16:30-18:30 MoC17 320A Recent Automation Technologies in Shipbuilding Industry I
16:30-18:30 MoC18 320B Recent Development of Intelligent Robots II: Mobility
16:30-18:30 MoC19 320C Control of Cooperative, Mobile Minirobots – Robotsoccer
16:30-18:30 MoC20 321C Latest Development in Mobile Machines
16:30-18:30 MoC21 321B Servo Control for Storage Systems and Precision Devices III
16:30-18:30 MoC22 321A Control of Mechanical Systems
16:30-18:30 MoC23 323 Large Scale Complex Systems: Theory
16:30-18:30 MoC24 324 Fault Tolerant Control
16:30-18:30 MoC25 328 Model Reduction and Realtime Optimization and Control
16:30-18:30 MoC26 327 Separation Control
16:30-18:30 MoC27 326 Power Electronics Applications
16:30-18:30 MoC28 330A Automotive Control and Estimation Using Look-Ahead Road Information
16:30-18:30 MoC29 330B Active Suspension
16:30-18:30 MoC30 330C Guidance and Robust Control of Information Spacecraft
16:30-18:30 MoCCC 401 Milestone Report by IFAC Coordinating Committee on Bio and Ecological Systems (CC8)
IFAC WC 2008 Technical Program Tuesday July 8, 2008
08:00-09:00 TuPL1 Auditorium (301) Robust Control in Biology: From Genes to Cells to Systems
09:00-10:00 TuPL2 Auditorium (301) Stochastic Learning and Optimization - a Sensitivity-Based Approach
10:30-12:30 TuA01 Atlantic Hall Systems and Signals I
10:30-12:30 TuA02 304A Stabilization of Nonlinear Systems I
10:30-12:30 TuA03 304B Advances in Higher Order Sliding Mode Control
10:30-12:30 TuA04 308 Applications of Nonlinear Control III
10:30-12:30 TuA05 307 Switching Stability and Control I
10:30-12:30 TuA06 310A Time Delay Systems: Stabilisation and Control
10:30-12:30 TuA07 310B Dynamic Games and Applications
10:30-12:30 TuA08 310C Robust Controller Synthesis I
10:30-12:30 TuA09 311C Nonlinear System Identification II
10:30-12:30 TuA10 311B Identification Algorithms and Applications
10:30-12:30 TuA11 311A Adaptive Control of Systems I
10:30-12:30 TuA12 313 Dependable Control of Discrete Event Systems I
10:30-12:30 TuA13 314 Sensor Networks
10:30-12:30 TuA14 318 Control Over Networks I
10:30-12:30 TuA15 317 Artificial Pancreas: Novel Applications of Modeling and Control in Biomedical Systems
10:30-12:30 TuA16 316 National and Regional Economies
10:30-12:30 TuA17 320A Recent Automation Technologies in Shipbuilding Industry II
10:30-12:30 TuA18 320B Recent Development of Intelligent Robots III: Vision & HRI
10:30-12:30 TuA19 320C Robot Manipulators I
10:30-12:30 TuA20 321C Mobile Robot Control I
10:30-12:30 TuA21 321B Low-Cost, High-Performance Sensor Technologies for Robotic and Consumer Applications
10:30-12:30 TuA22 321A Design and Development Tools for Mechatronic Systems
10:30-12:30 TuA23 323 Radio Frequency Identification (RFID) Technology in Supply Chain Management I
10:30-12:30 TuA24 324 Statistical and Parameter Estimation Based Methods
10:30-12:30 TuA25 328 Process Modeling, Identifcation, and Estimation
10:30-12:30 TuA26 327 Modeling, Operation and Control of Power Systems I
10:30-12:30 TuA27 326 Computational Intelligence Approach in Modeling and Control
10:30-12:30 TuA28 330A Hybrid Vehicle I
10:30-12:30 TuA29 330B Semi-Active Suspension and Roll-Over Prevention
10:30-12:30 TuA30 330C Satellite Navigation
14:00-16:00 TuB01 Atlantic Hall
14:00-16:00 TuB02 304A Stabilization of Nonlinear Systems II
14:00-16:00 TuB03 304B Advances in Higher Order Sliding Mode Observation and Estimation
14:00-16:00 TuB04 308 Applications of Nonlinear Control IV
14:00-16:00 TuB05 307 Switching Stability and Control II
14:00-16:00 TuB06 310A Time Delay Systems: Robust Control
14:00-16:00 TuB07 310B Linear Parameter-Varying Systems
14:00-16:00 TuB08 310C Robust Controller Synthesis II
14:00-16:00 TuB09 311C Nonlinear System Identification III
14:00-16:00 TuB10 311B Estimation Error Quantification
14:00-16:00 TuB11 311A Adaptive Control of Systems II
14:00-16:00 TuB12 313 Dependable Control of Discrete Event Systems II
14:00-16:00 TuB13 314 Coordination of Multiagent Systems
14:00-16:00 TuB14 318 Control Over Networks II
14:00-16:00 TuB15 317 Biosignals Analysis and Interpretation
14:00-16:00 TuB16 316 Systems and Control Sciences in Social Systems Applications
14:00-16:00 TuB17 320A Recent Automation Technologies in Shipbuilding Industry III
14:00-16:00 TuB18 320B Recent Development of Intelligent Robots IV: Architecture & Applications
14:00-16:00 TuB19 320C Robot Manipulators II
14:00-16:00 TuB20 321C Mobile Robot Control II
14:00-16:00 TuB21 321B Measurement & Actuation
14:00-16:00 TuB22 321A Neural Network Based Control
14:00-16:00 TuB23 323 Radio Frequency Identification (RFID) Technology in Supply Chain Management II
14:00-16:00 TuB24 324 Applications of Process Supervision and Fault Tolerant Control
14:00-16:00 TuB25 328 Process Modeling and Identification
14:00-16:00 TuB26 327 Modeling, Operation and Control of Power Systems II
14:00-16:00 TuB27 326 Fuzzy Systems and Control: Stability Analysis and Design
14:00-16:00 TuB28 330A Hybrid Vehicle II
14:00-16:00 TuB29 330B Vehicle Dynamics
14:00-16:00 TuB30 330C Guidance, Control & Navigation for Unmanned Air Vehicles
14:00-16:00 TuBCC 401 Milestone Report by IFAC Coordinating Committee on Manufacturing and Logistics Systems (CC5)
16:30-18:30 TuC01 Atlantic Hall Design Methods
16:30-18:30 TuC02 304A Asymptotic Stabilization of Nonlinear Systems
16:30-18:30 TuC03 304B Applications of Higher Order Sliding Mode Control
16:30-18:30 TuC04 308 Applications of Nonlinear Control V
16:30-18:30 TuC05 307 Analytic Design of Control Systems
16:30-18:30 TuC06 310A Delays in Interconnected Systems
16:30-18:30 TuC07 310B Robustness Analysis
16:30-18:30 TuC08 310C Robust Control Applications
16:30-18:30 TuC09 311C Nonlinear System Identification IV
16:30-18:30 TuC10 311B Particle Filtering and Monte-Carlo Methods
16:30-18:30 TuC11 311A Adaptive Control by Neural Networks
16:30-18:30 TuC12 313 Dependable Control of Discrete Event Systems III
16:30-18:30 TuC13 314 Recent Trends in Multiagents Formation Control
16:30-18:30 TuC14 318 Control Over Networks III
16:30-18:30 TuC15 317 Image-Based Biological and Medical Systems Modeling
16:30-18:30 TuC16 316 Automation for Improving International Stability
16:30-18:30 TuC17 320A Measurement
16:30-18:30 TuC18 320B Robotics for LCD & Semiconductor Industry
16:30-18:30 TuC19 320C Robot Manipulators III
16:30-18:30 TuC20 321C Mobile Robot Control III
16:30-18:30 TuC21 321B Low-Cost Safe Embedded Control System
16:30-18:30 TuC22 321A Fuzzy Logic Control Systems
16:30-18:30 TuC23 323 Industrial Applications of Distributed Real-Time Object-Computing
16:30-18:30 TuC24 324 Reliability & Safety Analysis: Fault Diagnosis by Discrete Event Systems
16:30-18:30 TuC25 328 Model Predictive and Optimization-Based Control
16:30-18:30 TuC26 327 Modeling, Operation and Control of Power Systems III
16:30-18:30 TuC27 326 Modeling and Identification with Fuzzy and Neural Techniques
16:30-18:30 TuC28 330A New Trends in Powertrain Control
16:30-18:30 TuC29 330B Sensors, Virtual Sensors and Observers
16:30-18:30 TuC30 330C Navigation
16:30-18:30 TuCCC 401 Milestone Report by IFAC Coordinating Committee on Power and Process Systems (CC6)
IFAC WC 2008 Technical Program Wednesday July 9, 2008
08:00-09:00 WePL1 Auditorium (301) Perspectives on System Identification
09:00-10:00 WePL2 Auditorium (301) Automation and Control Systems Technology in Korean Shipbuilding Industry: The State of the Art and the Future Perspectives
10:30-12:30 WeA05 307 Controller Constraints and Structure I
10:30-12:30 WeA06 310A Infinite Dimensional Systems: Distributed Parameter Systems
10:30-12:30 WeA07 310B Optimal Control Theory I
10:30-12:30 WeA08 310C Optimization Based Controller Synthesis I
10:30-12:30 WeA09 311C Hammerstein-Wiener System Identification
10:30-12:30 WeA10 311B Fault Detection I
10:30-12:30 WeA11 311A Nonlinear Adaptive Control I
10:30-12:30 WeA12 313 Hybrid Systems Modeling
10:30-12:30 WeA13 314 Stochastic Control
10:30-12:30 WeA14 318 Networked Systems: Rate Constraints, Quantization and Unreliable Communication
10:30-12:30 WeA15 317 Modeling Methods and Clinical Applications in Medical and Biological Systems I
10:30-12:30 WeA16 316 Perspectives for an Human Centred Systems Engineering: Trends and Issues
10:30-12:30 WeA17 320A Virtual-Remote Labs in Control Education: Real Experiences
10:30-12:30 WeA18 320B Automation in the Semiconductor, Display, and Electronics Industry
10:30-12:30 WeA19 320C Automated Optical Inspection Systems for Electronics Manufacturing Industry
10:30-12:30 WeA20 321C Informationally Structured Environments for Robotics
10:30-12:30 WeA21 321B Dynamics and Control of Micro and Nano-Scale Systems I
10:30-12:30 WeA22 321A Mechatronic Trends in Trains
10:30-12:30 WeA23 323 Industrial Applications of Real-Time Distributed Embedded Systems
10:30-12:30 WeA24 324 Production Planning & Control
10:30-12:30 WeA25 328 Model Predictive and Optimization-Based Control: Applications
10:30-12:30 WeA26 327 Control of Power Systems I
10:30-12:30 WeA27 326 Control Software Technology
10:30-12:30 WeA28 330A Engine Modelling
10:30-12:30 WeA30 330C Intelligent Vehicles Navigation and Control I
14:00-16:00 WeB01 Atlantic Hall
14:00-16:00 WeB02 304A Nonlinear Observers II
14:00-16:00 WeB03 304B Output Feedback Sliding Mode Control
14:00-16:00 WeB04 308 Polynomial Design Methods
14:00-16:00 WeB05 307 Controller Constraints and Structure II
14:00-16:00 WeB06 310A Infinite Dimensional Systems: Stabilization and Control
14:00-16:00 WeB07 310B Optimal Control Theory II
14:00-16:00 WeB08 310C Optimization Based Controller Synthesis II
14:00-16:00 WeB09 311C Subspace-Based System Identification
14:00-16:00 WeB10 311B Fault Detection II
14:00-16:00 WeB11 311A Robust Adaptive Control
14:00-16:00 WeB12 313 Reachability Computations for Hybrid Systems
14:00-16:00 WeB13 314 Applications of Stochastic Systems Theory
14:00-16:00 WeB14 318 Networked Systems: Consensus of Multi-Agent Systems and Related Results
14:00-16:00 WeB15 317 Modeling Methods and Clinical Applications in Medical and Biological Systems II
14:00-16:00 WeB16 316
14:00-16:00 WeB17 320A New Trials for Control Education
14:00-16:00 WeB18 320B Automation
14:00-16:00 WeB19 320C Robotics Interaction
14:00-16:00 WeB20 321C Robotics Estimation I
14:00-16:00 WeB21 321B Dynamics and Control of Micro and Nano-Scale Systems II
14:00-16:00 WeB22 321A Estimation and Control of State and Disturbance in Mechatronic Systems
14:00-16:00 WeB23 323 Industrial Applications of Real-Time Embedded and Distributed Systems
14:00-16:00 WeB24 324 New Trend in Decentralized Control
14:00-16:00 WeB25 328 Process Control Applications
14:00-16:00 WeB26 327 Control of Power Systems II
14:00-16:00 WeB27 326 Networked Control
14:00-16:00 WeB28 330A Engine Control
14:00-16:00 WeB29 330B Intelligent Vehicle, Safety and Body Systems
14:00-16:00 WeB30 330C Intelligent Vehicles Navigation and Control II
14:00-16:00 WeBCC 401 Highlight Round-Table Presentation by IFAC Coordinating Committee on Transportation and Vehicle Systems (CC7)
16:30-18:30 WeC03 304B Sliding Mode Control
16:30-18:30 WeC04 308 Linear Matrix Inequalities and Their Applications
16:30-18:30 WeC05 307 Decentralized Control
16:30-18:30 WeC06 310A Descriptor Systems
16:30-18:30 WeC07 310B Industrial Applications of Optimal Control
16:30-18:30 WeC08 310C Convex Optimization and Relaxations
16:30-18:30 WeC09 311C Recursive Identification
16:30-18:30 WeC10 311B Fault Detection III
16:30-18:30 WeC11 311A Adaptive, Nonlinear and Robust Control
16:30-18:30 WeC12 313 Analysis and Control of Hybrid Systems
16:30-18:30 WeC13 314 Stochastic System Identification
16:30-18:30 WeC14 318 Advances in Networked Systems: Asynchronous Control, Estimation and Synchronization Problems
16:30-18:30 WeC15 317 Modeling Methods and Clinical Applications in Medical and Biological Systems III
16:30-18:30 WeC16 316
16:30-18:30 WeC17 320A Control Education: Curricula
16:30-18:30 WeC18 320B Future Industrial Development
16:30-18:30 WeC19 320C Networked Robotic Systems
16:30-18:30 WeC20 321C Robotics Estimation II
16:30-18:30 WeC21 321B Dynamics and Control of Micro and Nano-Scale Systems III
16:30-18:30 WeC22 321A Identification and Diagnosis of Mechatronic Systems
16:30-18:30 WeC23 323 Discrete Event Systems in Manufacturing
16:30-18:30 WeC24 324 Supply and Logistics Networks
16:30-18:30 WeC25 328 Industrial Application of Process Control
16:30-18:30 WeC26 327 Control of Power Systems III
16:30-18:30 WeC27 326 Real-Time Systems
16:30-18:30 WeC28 330A Powertrain Control
16:30-18:30 WeC29 330B Chassis Control and Supervision
16:30-18:30 WeC30 330C Multi-Vehicle Systems I
16:30-18:30 WeCCC 401 Milestone Report by IFAC Coordinating Committee on Mechatronics, Robotics and Components (CC4)
IFAC WC 2008 Technical Program Thursday July 10, 2008
Track 31
08:00-09:00 ThPL1 Auditorium (301) A Control-Theoretic Approach to Model-Based Medicine
09:00-10:00 ThPL2 Auditorium (301) BigDog, the Rough-Terrain Robot
10:30-12:30 ThA01 Atlantic Hall Industrial Control Systems
10:30-12:30 ThA02 304A Faults and Estimation
10:30-12:30 ThA03 304B Predictive Control
10:30-12:30 ThA04 308 Tracking Control
10:30-12:30 ThA05 307 Adaptive Control I
10:30-12:30 ThA06 310A Disturbance Rejection and Control
10:30-12:30 ThA07 310B Control Problems for Dynamical Systems under Conflict and Uncertainty
10:30-12:30 ThA08 310C Robust Linear Matrix Inequalities
10:30-12:30 ThA09 311C Grey Box System Identification
10:30-12:30 ThA10 311B Excitation and Experiment Design
10:30-12:30 ThA11 311A Linear Parametrically Varying (LPV) Methodologies
10:30-12:30 ThA12 313 Stability of Hybrid and Switched Systems
10:30-12:30 ThA13 314 Learning and Estimation
10:30-12:30 ThA14 318 Networks and Control
10:30-12:30 ThA15 317 Control and Regulation in Biological Systems
10:30-12:30 ThA16 316
10:30-12:30 ThA17 320A Control Education: Teaching Tools and Methods
10:30-12:30 ThA18 320B Control Methods in Robotics
10:30-12:30 ThA19 320C Recent Advances in Intelligent Autonomous Systems
10:30-12:30 ThA20 321C Flexible Robots
10:30-12:30 ThA21 321B Dynamics and Control of Micro and Nano-Scale Systems IV
10:30-12:30 ThA22 321A Vibration Control and Flexible Systems
10:30-12:30 ThA23 323 R2R System Technology for Printed Electronics
10:30-12:30 ThA24 324 Semantic-Based Solutions for Enterprise Integration and Networking
10:30-12:30 ThA25 328 Applied Process Control
10:30-12:30 ThA26 327 Dynamic Interaction of Power Plants
10:30-12:30 ThA27 326 Flow Control in Internet
10:30-12:30 ThA28 330A Flexible Structure Diagnosis and Health Monitoring
10:30-12:30 ThA29 330B Automotive Systems Control
10:30-12:30 ThA30 330C Multi-Vehicle Systems II
14:00-16:00 ThB01 Atlantic Hall
14:00-16:00 ThB02 304A Nonlinear Output Regulation
14:00-16:00 ThB03 304B Nonlinear Predictive Control
14:00-16:00 ThB04 308 Tracking Control Applications
14:00-16:00 ThB05 307 Adaptive Control II
14:00-16:00 ThB06 310A Modeling and Control in the Behavioral Framework
14:00-16:00 ThB07 310B Evolutionary Algorithms
14:00-16:00 ThB08 310C Robust Time-Delay Systems I
14:00-16:00 ThB09 311C Identification for Control
14:00-16:00 ThB10 311B Stochastic Modelling and Control
14:00-16:00 ThB11 311A Recent Advances in Iterative and Repetitive Learning Control I
14:00-16:00 ThB12 313 Quantized Systems and Model Predictive Control of Hybrid Systems
14:00-16:00 ThB13 314 Kalman Filtering Techniques
14:00-16:00 ThB14 318 Design and Analysis of Networked Control Systems
14:00-16:00 ThB15 317 Control Issues in Metabolic Engineering
14:00-16:00 ThB16 316
14:00-16:00 ThB17 320A Control Education: E-Learning
14:00-16:00 ThB18 320B Embedded Component Technology for Network Robot System
14:00-16:00 ThB19 320C Tele Robotics
14:00-16:00 ThB20 321C Automation in Micro and Nano-Handling I
14:00-16:00 ThB21 321B Soft Computing/Computational Intelligence in Mechatronics
14:00-16:00 ThB22 321A Estimation, Detection and Diagnosis
14:00-16:00 ThB23 323 Production & Logistics Over Manufacturing Networking
14:00-16:00 ThB24 324 Architectures and Software Tools for Enterprise Integration and Networking in Manufacturing
14:00-16:00 ThB25 328 Design and Control
14:00-16:00 ThB26 327 Constraint and Security Monitoring and Control
14:00-16:00 ThB27 326 Congestion Control in Internet
14:00-16:00 ThB28 330A Guidance, Navigation and Control of Aerospace Vehicles
14:00-16:00 ThB29 330B Modeling and Control of Transportation Systems
14:00-16:00 ThB30 330C Transportation Logistics
14:00-16:00 ThB31 306 Guidance Navigation and Control
16:30-18:30 ThC01 Atlantic Hall
16:30-18:30 ThC02 304A Output Feedback Control
16:30-18:30 ThC03 304B MPC for Constrained Systems
16:30-18:30 ThC04 308 Fuzzy Control
16:30-18:30 ThC05 307 Applications of Adaptive Control Methods
16:30-18:30 ThC06 310A Complex Systems
16:30-18:30 ThC07 310B Methods in Optimal Control Design
16:30-18:30 ThC08 310C Robust Time-Delay Systems II
16:30-18:30 ThC09 311C Closed Loop Identification
16:30-18:30 ThC10 311B Vibration and Modal Analysis
16:30-18:30 ThC11 311A Recent Advances in Iterative and Repetitive Learning Control II
16:30-18:30 ThC12 313 Switching and Hybrid Stochastic Systems
16:30-18:30 ThC13 314 Robust and Nonlinear Estimation
16:30-18:30 ThC14 318 Fault Tolerance and Coordination in Networked Control Systems
16:30-18:30 ThC15 317 Control Issues in Biological Wastewater Treatment
16:30-18:30 ThC16 316
16:30-18:30 ThC17 320A Control Education: Remote Laboratories
16:30-18:30 ThC18 320B Robotics Vision
16:30-18:30 ThC19 320C Intelligent Robotics Systems
16:30-18:30 ThC20 321C Automation in Micro and Nano-Handling II
16:30-18:30 ThC21 321B Human Cognition, Speech and Decision-Making
16:30-18:30 ThC22 321A Sensing, Fault Detection and Control of Hydraulic Systems
16:30-18:30 ThC23 323 Production and Logistics Structures As Complex Adaptive Systems (CASs)
16:30-18:30 ThC24 324 Internet of Services
16:30-18:30 ThC25 328 Industrial Application Results of Process Control
16:30-18:30 ThC26 327 Intelligent Control of Power Plants
16:30-18:30 ThC27 326 Virtual Automation Networks
16:30-18:30 ThC28 330A Launch Vehicle and Missile Autopilot
16:30-18:30 ThC29 330B Small Satellites and Propulsion Systems
16:30-18:30 ThC30 330C Automatic Control, Optimization, Real-Time Operations in Transportation
16:30-18:30 ThC31 306 Intelligent Robotics
IFAC WC 2008 Technical Program Friday July 11, 2008
09:00-10:00 FrPL1 Auditorium SmartFactory - from Vision to Reality in Factory Technologies
10:30-12:30 FrA02 304A Robust Nonlinear Control
10:30-12:30 FrA03 304B Anti-Windup Strategies
10:30-12:30 FrA04 308 Discrete-Time Nonlinear Systems
10:30-12:30 FrA05 307 Applications of Nonlinear Control Methods
10:30-12:30 FrA06 310A Fractional Differentiation and Its Applications I
10:30-12:30 FrA07 310B Algorithm and Software for Optimal Control
10:30-12:30 FrA08 310C Reachability, Estimation and Control Synthesis under Uncertainty I
10:30-12:30 FrA09 311C Continuous Time System Identification
10:30-12:30 FrA10 311B Switching Control I
10:30-12:30 FrA11 311A Gain Scheduling
10:30-12:30 FrA12 313 Supervisory Control Design and Applications
10:30-12:30 FrA13 314 Optimal Filtering and Estimation
10:30-12:30 FrA14 318 Management of Natural Resources I
10:30-12:30 FrA15 317 Bioprocess Control Applications
10:30-12:30 FrA16 316
10:30-12:30 FrA17 320A Control Education: Simulation & Modelling Learning Tools
10:30-12:30 FrA18 320B Localization and Mapping
10:30-12:30 FrA19 320C Haptics Technology: Current Trends and Potential of Haptics
10:30-12:30 FrA20 321C Advanced Intelligent System Based on Machine Vision
10:30-12:30 FrA21 321B Modeling Human Performance
10:30-12:30 FrA22 321A Intelligent Controllers
10:30-12:30 FrA23 323 Manufacturing Plant Control
10:30-12:30 FrA24 324 Job and Activity Scheduling I
10:30-12:30 FrA25 328 Monitoring and Performance Assessment
10:30-12:30 FrA26 327 Intelligent Control of Power Systems
10:30-12:30 FrA27 326 Remote Sensor Data Acquisition
10:30-12:30 FrA28 330A Marine System I
10:30-12:30 FrA29 330B Adaptive and Robust Control in Aerospace Vehicles
10:30-12:30 FrA30 330C Non-Intrusive Human Monitoring
14:00-16:00 FrB02 304A Chaotic Systems and Bifurcations
14:00-16:00 FrB03 304B Systems with Saturation
14:00-16:00 FrB04 308 Topics in Control
14:00-16:00 FrB05 307 Digital Control
14:00-16:00 FrB06 310A Fractional Differentiation and Its Applications II
14:00-16:00 FrB07 310B Stochastic Optimal Control
14:00-16:00 FrB08 310C Reachability, Estimation and Control Synthesis under Uncertainty II
14:00-16:00 FrB09 311C Frequency Domain System Identification
14:00-16:00 FrB10 311B Switching Control II
14:00-16:00 FrB11 311A Autotuning
14:00-16:00 FrB12 313 Stochastic Hybrid Systems
14:00-16:00 FrB13 314
14:00-16:00 FrB14 318 Management of Natural Resources II
14:00-16:00 FrB15 317 Nonlinear Control and Estimation in Bioprocesses
14:00-16:00 FrB16 316
14:00-16:00 FrB17 320A Mechatronics Education
14:00-16:00 FrB18 320B Mechatronics for Special Feature Robots
14:00-16:00 FrB19 320C Putting Energy Back in Robotics
14:00-16:00 FrB20 321C Electrical Machine Control and Applications
14:00-16:00 FrB21 321B Human-Robot Interaction
14:00-16:00 FrB22 321A Structural Components
14:00-16:00 FrB23 323 Intelligent Manufacturing Systems
14:00-16:00 FrB24 324 Job and Activity Scheduling II
14:00-16:00 FrB25 328 Control Mechanisms in Systems Biology
14:00-16:00 FrB26 327 AI Applications in Power Plants
14:00-16:00 FrB27 326 Remote and Distributed Control
14:00-16:00 FrB28 330A Marine System II
14:00-16:00 FrB29 330B Cooperative Motion Control of Multiple Autonomous Vehicles
14:00-16:00 FrB30 330C Control Design for Transportation Vehicles and Systems