Conference Agenda

Overview and details of the sessions of this conference. Please select a date or location to show only sessions at that day or location. Please select a single session for detailed view (with abstracts and downloads if available).

 
 
Session Overview
Date: Sunday, 18/Sept/2022
4:00pm
-
6:00pm
EFCE - Meeting: Working party on fluid separations
Location: Room 1
6:00pm
-
7:30pm
Welcome: Registration & cocktail sponsorised by Koch-Glitsch
7:30pm
-
9:30pm
Student event: Sponsored by Arkema
La Table du Belvédère - 11 Bd des Récollets TOULOUSE

Date: Monday, 19/Sept/2022
8:30am
-
9:00am
Registration
9:00am
-
9:30am
Openning ceremony
9:30am
-
10:30am
Plenary_1
Location: Room 1
Chair: Hendrik Adriaan Kooijman, Shell Global Solutions International BV, Netherlands, The
 

Absorption and CO2 capture

Véronique Pugnet, Stéphane Jouenne

Total Energies, France

10:30am
-
11:00am
Coffee break1: Sponsored by Arkema
11:00am
-
12:40pm
Topic_5_A: Process operation and troubleshooting
Location: Room 2
Chair: Ralf Proplesch, DSM Nutritional Products, Switzerland
 

First Impressions of Multiple Dividing Wall Column Operation: Design and First Experimental Results

Yannick Waibel, Lea Trescher, Lena-Marie Ränger, Thomas Grützner

Ulm University, Institute of Chemical Engineering, Thermal Process Engineering



New aspects of modeling and operation of nitrous gas absorption in packed columns

Jan F. Maćkowiak, Patrick Franke, Reiner Chromik, Jerzy Maćkowiak

ENVIMAC Engineering GmbH, Germany



Experimental investigation of foam in packed distillation columns

Rolf Staud, Zhenlong Sun, Shaoyou Xu, Katharina Jasch, Stephan Scholl

Technical University of Braunschweig, Germany



Automated detection of loading and flooding points in packed columns

Georg Haushofer, Verena Wolf-Zöllner

Montanuniversität Leoben, Austria

Topic_6_A: Energy and sustainability in separation processes
Location: Room 1
Chair: Mario Roza, Sulzer, Switzerland
 

Carbon Dioxide Removal from the atmosphere by weathering minerals in a gas-liquid-solid contactor.

Richard C Darton1, Aidong Yang1, Liam Bullock3, Lei Xing2

1: University of Oxford, United Kingdom; 2: Loughborough University; 3: Geociencias Barcelona



Development of a novel industrial process for stripping of carbon dioxide and ammonia from bioprocess wastewater

José-Francisco Pérez-Calvo1, Martin Lucke1, Tuvshinjargal Otgonbayar2, Thomas Raiser1, Marco Mazzotti2

1: SULZER CHEMTECH AG, Switzerland; 2: Institute of Energy and Process Engineering, ETH Zurich, Switzerland



Reactive distillation of mixtures containing formaldehyde, methanol, water, and poly(oxymethylene) dimethyl ethers on pilot-scale

Alvaro Ferre1, Johannes Voggenreiter1, Christian F. Breitkreuz2, Hans Hasse2, Jakob Burger1

1: Technical University of Munich, Laboratory of Chemical Process Engineering, Straubing/Germany; 2: Technische Universität Kaiserslautern, Laboratory of Engineering Thermodynamics, Kaiserslautern/Germany



Modeling, validation, exergy evaluation and optimization of an industrial cryogenic air distillation plant under variable demand

Camilo Mora, Alvaro Orjuela

Universidad Nacional de Colombia, Colombia

12:40pm
-
2:00pm
Lunch1
2:00pm
-
3:00pm
Plenary_2
Location: Room 1
Chair: Jens-Uwe Repke, TU Berlin, Germany
 

Horizon Europe support for the European Green Deal

Soren Bowadt

HaDEA, Danemark

3:00pm
-
4:40pm
Topic_5_B: Process operation and troubleshooting
Location: Room 2
Chair: Tony Cai, Fractionation Research, Inc., United States of America
 

Troubleshooting a Column - Problem and Solution

Sebastian Löw1, Vijaya Bhaskar R. Gummala2, André Ohligschläger1, Tim Rogalinski2, Ralf Ziegler2

1: Nobian GmbH, Germany; 2: Siemens AG, Germany



Digitalization of a Periodic Stripper Unit for Real-Time Data Integration with Predictive Modelling

Mads Stevnsborg, Jens Abildskov, Jakob K. Huusom

Department of Chemical and Biochemical Engineering, Technical University of Denmark, Denmark



Root Cause Analysis for Structured Packing Failure (Case Study)

Ahmad Bunaiyan, Vasileios Tsachouridis, Nasiru Tukur

Saudi Aramco, Saudi Arabia



How to calculate column hydraulics considering operational effects

Volker Engel

WelChem Process Technology GmbH, Germany

Topic_6_B: Energy and sustainability in separation processes
Location: Room 1
Chair: Andre de Haan, Delft University of Technology, Netherlands, The
 

Comparison of VCHP and MVR assisted distillation of MEG-water mixture via dynamic simulations

Ioannis Tyraskis1, Marija Saric1, Andrew Marina1, Pascal Padberg2, Manuel Graber2, Yann Pellny2

1: TNO, 1755 ZG, Petten, the Netherlands; 2: TLK Energy GmbH, 38106 Braunschweig, Germany



Vapor Recompression: An interesting option for vacuum columns?

Armin Rix, Moritz Schröder, Niklas Paul, Christoph Ehlers

Evonik Operations, Germany



Assessment of Dividing Wall Column separations - Revisit to the Vmin-diagram

Ivar J. Halvorsen

SINTEF, Norway



Can simple side stream configurations compete with fully thermally coupled dividing wall columns?

Momme Adami, Anna Sophia Horsch, Mirko Skiborowski

Institute of Process Systems Engineering, Hamburg University of Technology, Hamburg/Germany

4:40pm
-
5:00pm
Coffee break2
5:00pm
-
6:00pm
Poster session
 

A kinetic mass-transfer study of the oxidative-absorption of SO2 in H2O2 aqueous solutions

Domenico Flagiello1, Francesco Di Natale1, Amedeo Lancia1, Ilio Sebastiani2, Fabrizio Nava2, Antonino Milicia2, Alessandro Erto1

1: Department of Chemical, Materials and Production Engineering, University of Naples Federico II – P.le Tecchio 80, 80125 Naples, Italy; 2: Desmet Ballestra SpA – Via Piero Portaluppi 17 - 20138 Milan, Italy



A Novel Intensified and Integrated Distillation Approach for Improving Manufacture of Propylene Glycol Monomethyl Ether Acetate

Gwang Sik Kim1, Muhammad Islam1, Yus Donald Chaniago2, Kee-Kahb Koo3, Le Cao Nhien1, Riaz Amjad1, Moonyong Lee1

1: Yeungnam University, Korea, Republic of (South Korea); 2: Ulsan National Institute of Science and Technology, Republic of (South Korea); 3: Sogang University, Republic of (South Korea)



A Novel Intensified and Integrated Distillation Approach for Improving Manufacture of Propylene Glycol Monomethyl Ether Acetate (PGMEA)

GWANGSIK KIM, MOONYONG LEE

Yeungnam University, Korea, Republic of (South Korea)



A Simple Method for Calculating a Pitchfork Distillation Boundary

Lechoslaw Krolikowski

Wroclaw Universty of Science and Technology, Poland



Advanced marine scrubbing for simultaneous de-SOx/NOx using a wet oxidative process coupled with wash water treatment

Domenico Flagiello, Alessandro Erto, Amedeo Lancia, Francesco Di Natale

Department of Chemical, Materials and Production Engineering, University of Naples Federico II – P.le Tecchio 80, 80125 Naples, Italy



An optimisation-based comparison of different dividing wall column configurations

Fanyi Duanmu, Eva Sorensen

University College London (UCL), United Kingdom



Analysis of a marine scrubber operation with conventional and AI based methodologies

Erasmo Salvatore Napolitano1,2, Lelio Campanile3, Alberto Portolano4, Francesco Di Natale1, Luigi Piero Di Bonito3,5

1: The Sustainable Technologies for Pollution Control (STPC-Lab) Department of Chemical, Materials and Production Engineering, University of Naples Federico II; P.le Tecchio, 80, 80125 Naples, Italy; 2: DIMES Department, University of Calabria, Via P. Bucci cubo 42C, 87036 Rende (Cs), Italy; 3: Department of Mathematics and Physics, University of Campania Luigi Vanvitelli; Viale Lincoln, 5 - 81100 Caserta (Italy); 4: Grimaldi Euromed, Via Marchese Campodisola 13, 80133 Napoli (Italy); 5: Intensification of SeparaTion processes for the Environment and the circular Economy Lab (STEEL), Department of Chemical, Material and Industrial Production Engineering, University of Naples Federico II, P.le V. Tecchio, 80 - 80125 Napoli (ITALY)



Are Deep Eutectic Solvents Feasible for Simultaneous Capture of CO2 and H2S from Natural Gas?

Clara Vilela Weikert, Larissa Thaís Bruschi, Rubens Maciel Filho, Maria Regina Wolf Maciel

State University of Campinas, Brazil



Assessment of Deep Eutectic Solvents for Alcohol-Water Separations by Extractive Distillation

Andre de Haan, Dhoni Hartanto, Dhoni Hartanto

Delft University of Technology, Netherlands, The



Balance between steady-state design and dynamic control of four-product dividing wall columns

Xing Qian1, Shengkun Jia2

1: College of Information Science and Technology, Beijing University of Chemical Technology, Beijing 100029, China; 2: School of Chemical Engineering and Technology, Chemical Engineering Research Center, State Key Laboratory of Chemical Engineering, Tianjin University, Tianjin 300350, China



BE-Clean: P2X technology for gas desulphurization

Sebastian Borgquist1, Sebastian Nis Bay Villadsen1, Philip Loldrup Fosbøl1, Jens Abildskov2

1: CERE, Dept. Chem. Biochem. Eng., Tech. Univ. Denmark; 2: PROSYS, Dept. Chem. Biochem. Eng., Tech. Univ. Denmark



CFD simulation and additive manufacturing as a combined tool for the development of innovative structured packings on a laboratory scale

Nadin Sarajlic1, Johannes Neukäufer2, Mohamed Adel Ashour2, Thomas Grützner2, Carsten Knösche3, Jürgen Paschold3, Harald Klein1, Sebastian Rehfeldt1

1: Technical University of Munich, Germany; 2: Ulm University, Germany; 3: BASF SE, Germany



CO2 CAPTURE USING ADSORBENTS BASED ON SUPPORTED IMINES

Carlos Alberto Augusto Sanchez Quiñones, Silvia Álvarez-Torellas, Jose Antonio Delgado, V. Ismael Águeda Maté, Marcos Larriba Martínez, María Martín Martínez

Catalysis and Separation Processes group (CyPS), Complutense University of Madrid



CO2 freezing in low-temperature distillation of natural gas–carbon dioxide mixtures

Nuradibah Binti Adnan, Megan Jobson, Robin Smith

University of Manchester, United Kingdom



Comparative assessment of solvent-based post-combustion capture processes for waste-to-energy

Tuvshinjargal Otgonbayar, José Francisco Pérez Calvo, Marco Mazzotti

ETH Zurich, Switzerland



Conducting Distillative Separation Efficiency Measurements with Elevated Feed Viscosities

Sven Gutperl, Katharina Jasch, Stephan Scholl

TU Braunschweig, Germany



Controllability of pilot multiple dividing wall column for various feed compositions

Goran Lukač1, Ulrich Preißinger2, Igor Dejanović1, Thomas Grützner2

1: University of Zagreb, Faculty of Chemical Engineering and Technology, Zagreb, Croatia; 2: Ulm University, Institute of Chemical Engineering, Ulm, Germany



Controllability study of a dual condenser four product DWC

Goran Lukač1, Ivar J. Halvorsen2, Žarko Olujić3, Igor Dejanović1

1: University of Zagreb, Faculty of Chemical Engineering and Technology, Croatia; 2: SINTEF, Norway; 3: Retired



Cyrene and derivatives of cyrene as biobased entrainers in extractive distillation

Boelo Schuur, Thomas Brouwer, Jorrit Bock, Simon Hooisma

University of Twente, The Netherlands



Design of a Novel Process for CO2 Capture Using Deep Eutectic Liquids

Carlos Abraham Mora-Garduño1, Karla Rebeca Jalomo-Fonseca1, Ana Gabriela Romero-Garcia1, Jose Maria Ponce-Ortega2, Betzabe Gonzalez-Campos2, Juan Gabriel Segovia-Hernandez1

1: Universidad de Guanajuato, Mexico; 2: Universidad Michoacana de san Nicolas de Hidalgo, Mexico



Design of Intensified processes separation to recover Furfural and coproducts Economic, Environmental, Safety and Control evaluation.

Gabriel Contreras-Zarazúa, Miriam E. Jasso-Villegas, Eduardo Sánchez-Ramírez, Juan Gabriel Segovia-Hernandez

Universidad de Guanajuato, Mexico



Design of membrane based gas-liquid absorption units: a fast, efficient, high throughput batch to continuous methodology

Eglé Ferreri, Christophe Castel, Eric Favre

Laboratoire Réactions et Génie des Procédés, Université de Lorraine, CNRS, LRGP, Nancy



Direct and fully automated shortcut method for designing an extractive dividing wall column: 1. Minimum azeotropic Mixtures with a Heavy Entrainer

Fatima Zohra SEIHOUB1, Vincent Gerbaud2,3, Hassiba Benyounes4

1: Laboratoire de Génie Chimique et de Catalyse Hétérogène, Université de Science et de la Technologie – Mohamed Boudiaf, Oran, Algérie; 2: Université de Toulouse, INP, UPS, LGC (Laboratoire de Génie Chimique), 4 allée Emile Monso, F-31432 Cedex 04 Toulouse, France; 3: CNRS, LGC (Laboratoire de Génie Chimique), F-31432 Cedex 04 Toulouse, France; 4: UST. Oran, Laboratoire de chimie physique de matériaux, catalyse et environnement, Oran, Algeria



Downstream processing of dimethyl ether synthesized from biogas with a hydrogen-enhanced reaction

Caroline Otto, Bernd Benker, Andreas Lindermeir

TU Clausthal, Germany



Dynamic behavior of thermosyphon-assisted falling film distillation column

José Luiz Francisco Alves, Ricardo Antonio Francisco Machado, Cintia Marangoni

Federal University of Santa Catarina, Brazil



Energy and Control Analysis in Intensified Schemes for Acetone Purification

Jonathan Martin Amezquita-Ortiz1, Heriberto Alcocer-Garcia1, Gabriel Contreras-Zarazua1, Javier Fontalvo2, Juan Gabriel Segovia-Hernandez1

1: Universidad de Guanajuato, Mexico; 2: Universidad Nacional de Colombia-Manizalez



Energy saving potential of dividing wall columns identified by NQ-curves

Lena-Marie Ränger1, Tobias Seidel2, Michael Bortz2, Thomas Grützner1

1: Ulm University, Germany; 2: Fraunhofer Institute for Industrial Mathematics ITWM, Germany



Enhancing the SO2 removal efficiency of a spray tower using electrified water droplets

Arianna Parisi1, Claudia Carotenuto2, Amedeo Lancia1, Francesco Di Natale1

1: The Sustainable Technologies for Pollution Control Lab, Department of Chemical, Material and Industrial Production Engineering, University of Naples Federico II, Piazzale V. Tecchio 80, 80125 Napoli, Italy; 2: Department of Engineering, University of Campania “L. Vanvitelli”, Via Roma 29, 81031 Aversa (Caserta), Italy



Entrainer selection for extractive distillation using the Infinitely Sharp Split method

Ivonne Rodriguez-Donis1, Jens Abildskov2, Nataliya Shcherbakova3, Vincent Gerbaud3

1: Laboratory of Agro-Industrial Chemistry, France; 2: PROSYS, Department of Chemical and Biochemical Engineering, Denmark; 3: Chemical Engineering Laboratory, France



EVALUATION OF CHEMICAL ABSORPTION AND SOLVENT REGENERATION FOR CO2 CAPTURE FROM FLUE GASES WITH DIFFERENT DESIGN CONFIGURATIONS

Larissa Thaís Bruschi, Clara Vilela Weikert, Rubens Maciel Filho, Maria Regina Wolf Maciel

State University of Campinas, Brazil



Exergy analysis of a Top Heat-Integrated Distillation Columns (T-HIDiC) for Propylene-Propane system

Javier Mancera1, Carlos Arturo Martinez-Riascos1, Diego Fernando Mendoza2, Marco Andrés Guevara-Luna3

1: Universidad Nacional de Colombia, Colombia; 2: Universidad de Antioquia, Colombia; 3: Université de Strasbourg, France



Intensification of CO2 Capture from Methane-rich Streams Using a Rotating Packed Bed Absorption Column

João Gabriel Mendes1, Gabriel Simões1, Delano Mendes1, Silvio Alexandre Vieira de Melo2, Karen Pontes1, Markus Illner2, Erik Esche2, Jens-Uwe Repke2

1: Federal University of Bahia (UFBA), Brazil; 2: Technische Universität Berlin, D-10623 Berlin, Germany



Integrated entrainer design for extractive distillation using the infinitely sharp splits method and computer-aided molecular design

Adem Rosenkvist Aouichaoui Nielsen1, Ivonne Rodriguez-Donis2, Vincent Gerbaud3, Natalya Shcherbakova3, Jens Abildskov1

1: Department of Chemical and Biochemical Engineering, Technical University of Denmark, Denmark; 2: Laboratoire de Chimie Agro-industrielle, LCA, Université de Toulouse, INRA, Toulouse, France; 3: Laboratoire de Génie Chimique, Université de Toulouse, CNRS, INP, UPS, Toulouse, France



Influence of the Size of Prefractionator on Processing Capacity for Two-Column Batch Distillation Processes

Bence Nemeth, Laszlo Hegely, Peter Lang

Budapest University of Technology and Economics, Department of Building Services and Process Engineering, Hungary



Influence of dividing wall position on performance of dividing wall column with vapor feed

Huiying Liu, Shengkun Jia, Yiqing Luo, Xigang Yuan

Tianjin University, China, People's Republic of



Industrial experience in using cyclic distillation for the purification of ethanol food grade

Olesja Bedryk, Alexander Shevchenko, Vladimir Maleta, Anton Kiss

University of Manchester, United Kingdom



Improving Design and Scale-up of Columns with Structured Packings by Means of CFD

Marc Fan Xia, Maximilian Peter Neumann, Sebastian Rehfeldt, Harald Klein

Technical University of Munich, Department of Mechanical Engineering, Institute of Plant and Process Technology, Garching/Germany



Hydraulic investigations of the operating limits of high performance trays

Felicitas Sophia Engel, Harald Klein, Sebastian Rehfeldt

Technical University of Munich, Germany



Gas absorption performance and stability of fine bubbles in seawater and saline solutions

José de Jesús Piña Torres1, Julián Cabrera Ruiz2, J. Rafael Alcantara Avila3

1: Technical University of Munich, Germany; 2: Universidad de Guanajuato; 3: Kyoto Univeristy, Japan



Further development of the guideline for standardized characterization measurements of packed columns

Andrea Triebl, Marcus Schlager, Georg Haushofer, Verena Wolf-Zöllner, Markus Lehner

Montanuniversität Leoben, Austria



Flow morphology of TEG desiccant in a structured packing air dehumidifier exposed to floating conditions

Tural Mamedov1, Eckhard Schleicher1, Markus Schubert1, Thomas Ehlert2, Eugeny Kenig2, Uwe Hampel1,3

1: Helmholtz-Zentrum Dresden-Rossendorf, Institute of Fluid Dynamics, 01328 Dresden, Germany; 2: Paderborn University, Faculty of Mechanical Engineering, Chair of Fluid Process Engineering, D-33098 Paderborn, Germany; 3: TU Dresden, Institute of Power Engineering, Chair of Imaging Techniques in Energy and Process Engineering, 01062 Dresden, Germany



Flashing feed and mist eliminator performance at critical fluid properties

Alexander Döß1, Markus Schubert1, Eckhard Schleicher1, Felix Flegiel2, Uwe Hampel1,3

1: Helmholtz-Zentrum Dresden-Rossendorf, Institute of Fluid Dynamics, Bautzner Landstraße 400, 01328 Dresden, Germany.; 2: Linde GmbH, Engineering Division, Dr.-Carl-von-Linde Straße 6–14, 82049 Pullach, Germany; 3: Technische Universität Dresden, Chair of Imaging Techniques in Energy and Process Engineering, 01062 Dresden, Germany



Experimental studies on the fluid dynamics of a miniaturized measuring cell for an improved design procedure of distillation columns

Amelie Merkel, Wibke Leushacke, Dominik Plate, Marcus Gruenewald

Ruhr-Universität Bochum, Germany



Experimental investigations on the fluid-dynamic design of high-performance separating trays based on a miniaturized measuring cell

Wibke Leushacke, Amelie Merkel, Marcus Grünewald

Ruhr-University Bochum, Germany



Experimental Investigations of Fluid Dynamics of Gravity-destabilized Liquid Film Flows over Structured Surfaces Using Light Induced Fluorescence

Hannes Raddant, Georg Brösigke, Christian Hoffmann, Markus Illner, Jens-Uwe Repke

Technische Universität Berlin, Germany



Experimental Investigation of the Impact of Physico-chemical Properties on Liquid Films Flow Over Flat and Corrugated Surfaces.

Mohamad AL SAYEGH

Laboratoire de génie chimique de Toulouse, France



Experimental Investigation of the Impact of Physico-chemical Properties on Liquid Film Flow Over Flat and Corrugated Surfaces.

Mohamad AL SAYEGH1,2, David ROUZINEAU1, Michel MEYER1, Emmanuel CID1, Pascal ALIX2, Christine DALMAZZONE2, John ROESLER2

1: Laboratoire de génie chimique de Toulouse,France; 2: IFP Energies Nouvelles, Solaize, France



Experimental characterization of an innovative separation tray with enhanced flexibility

Julia Riese, Henrik Fasel, Marcus Grünewald

Ruhr University Bochum, Germany



Exergy analysis of a Top Heat-Integrated Distillation Columns (T-HIDiC) for Propylene-Propane system

Javier Mancera-Apolinar1, Marco Andres Guevara-Luna2, Diego Mendoza-Muñoz3, Carlos Martinez-Riascos1

1: Universidad Nacional de Colombia, Colombia; 2: Université de Strasbourg, France; 3: Universidad de Antioquia, Colombia



Intensified extractive distillation process for the separation of Acetone/Methanol mixture using the ionic liquid 1-Allyl-3-Methylimidazolium Bromide

Fadia Nouara Guella, Hassiba Benyounes

University of Sciences and Technology of Oran Mohamed Boudiaf, Algeria



Rapid method for prediction of random packing performance based on minimized experimental efforts

Jerzy Maćkowiak

ENVIMAC Engineering GmbH, Germany



Investigations on thermosiphon reboiling using foaming liquid mixtures

Laura Strodtmann, Katharina Jasch, Stephan Scholl

Technische Universität Braunschweig, Germany



PREDICTING PRESSURE DROP OF ADVANCED WIRE GAUZE CORRUGATED SHEET STRUCTURED PACKINGS FOR DEEP VACUUM APPLICATIONS

Zarko Olujic1, Johannes Sacher2, Jens Uwe Repke2

1: Retired, The Hague, The Netherlands; 2: Technische Universität Berlin, Straße des 17. Juni 135, 10136 Berlin, Germany



Parallel column model for Reactive Dividing Wall Column simulation

Ruan de Villiers, Hendrik A. Kooijman, Ross Taylor

Clarkson University, United States of America



Optimizing Mass Transfer for Post Combustion Carbon Capture

Ming Yang Lee1, Saravanan Venkatesan2, Karl Stephenne2, Christian Bachmann1

1: Sulzer Chemtech AG, Switzerland; 2: Shell Technology Centre Bangalore, India



Optimisation of the Dehydration of Isopropanol by Batch Heteroazeotropic Distillation with Off-cut Recycling

Bence Nemeth, Laszlo Hegely, Peter Lang

Budapest University of Technology and Economics, Hungary, Faculty of Mechanical Engineering, Department of Building Service and Process Engineering



Optimal design and operation of hybrid distillation/pervaporation processes

Dian Chia, Eva Sorensen

University College London (UCL), United Kingdom



Optimal design and operation of flexible reactive distillation processes

Aikaterini Tsatse, Eva Sorensen

University College London (UCL), United Kingdom



Heterogeneous Azeotropic Separation with Intermediate Boiling Point: from Thermodynamic Analysis to Process Design

Mingmei Wang, Lin Li, Erqiang Wang, Zengxi Li

University of Chinese Academy of Sciences, China, People's Republic of



Performances of an advanced Y-type structured packing produced by 3D foam-printing for packed towers in FGD process intensification

Domenico Flagiello, Daniele Tammaro, Alessandro Erto, Pier Luca Maffettone, Amedeo Lancia, Francesco Di Natale

Department of Chemical, Materials and Production Engineering, University of Naples Federico II – P.le Tecchio 80, 80125 Naples, Italy



A feasible divided wall column process for the purification of cinnamic aldehyde from Vietnam's Cinnamomum Cassia oil

Trung-Dung NGUYEN1, Ngoc-Quang PHAN1, Hong-Ha CAO1, Hong-Duc TA1, Xuan-Mi MEYER2, Jean-Francois BLANCO2, Patrick COGNET2, Michel MEYER2

1: Hanoi University of Science and Technology, Vietnam; 2: Universite de Toulouse, ENSIACET – INP de Toulouse, Laboratoire de Genie Chimique, UMR CNRS 5503, France



Recovery and characterization of cellulosic ethanol from fermentation of sugarcane bagasse

Rubens Maciel Filho4, Celina Yamakawa1, Sebastian Rojas2, Willian Herrera4, Carlos E.V. Rossell3, Maria Regina Wolf Maciel4

1: Technical University of Denmark; 2: Goethe University Frankfurt; 3: Center on Energy Planning-State University of Campinas; 4: School of Chemical Engineering- State University of Campinas



Simulation and Control of C9-C10 Aromatics Splitter Column of Bouali Sina Petrochemical Company

Mortaza Zivdar1, Seyed Mortaza Mirhosseini2, Mohammad Amin Mokhtari2, Mohammad Abdollahi3

1: Professor, Chemical Engineering Department, University of Sistan and Baluchestan, P.O. Box 98135-674, Zahedan, Iran; 2: MSc, Chemical Engineering Department, University of Sistan and Baluchestan, P.O. Box 98135-674, Zahedan, Iran; 3: Process Dept. Bouali Sina Petrochemical Company, Site 4, Petrochemical Special Economic Zone, Bandar-e Mahshahr, Iran



Simulation of a Cryogenic 13C Isotope Distillation Process Applying Different Cooling Concepts

Philipp Fritsch1, Michael Hölzl1, Alexander Alekseev1,2, Sebastian Rehfeldt1, Harald Klein1

1: Technical University of Munich; 2: Linde GmbH, Linde Engineering



Simulation of eucalyptus bio-oil and Brazilian crude oils blends distillation: effects, challenges and opportunities.

Daniel Santos Fernandes, Leonardo Vasconcelos Fregolente, Maria Regina Wolf Maciel

School of Chemical Engineering (FEQ), University of Campinas (UNICAMP), 13083-852 Campinas, Sao Paulo, Brazil



Simulation of eucalyptus bio-oil and Brazilian crude oils blends distillation: effects, challenges and opportunities.

Daniel Santos Fernandes, Leonardo Vasconcelos Fregolente, Maria Regina Wolf Maciel

Chemical Engineering Faculty - State University of Campinas (UNICAMP), Brazil



Solvent selection for simultaneous separation of furans from catalytic reactor in downstream purification process

Ljudmila Fele Žilnik, Uroš Novak, Miha Grilc, Blaž Likozar

National Institute of Chemistry, Slovenia



Solvent Management by Oxygen Removal in Amine based Post Combustion CO2 Capture

Tanya Srivastava

TNO, Netherlands, The



Study of a Supported Enzymatic Reactive Distillation using 3-D printed internals

Nicolas Chaussard1, Cedric Decarpigny2, Clemence Nikitine1, David Rouzineau3, Renato Froidevaux2, Michel Meyer3, Pascal Fongarland1

1: CP2M, UMR 5128, Université Claude Bernard Lyon 1, CNRS, CPE Lyon, Villeurbanne, France; 2: UMRT BioEcoAgro 1158, Equipe Biotranformation/Enzymes et Biocatalyse, Univ Lille, INRAE, Univ Liège, UPJV, JUNIA, Univ Artois, Univ Littoral côté d’Opale, ICV – Institut Charles Violette, G-59000 Lille, France; 3: LGC, UMR 5503 Université de Toulouse, CNRS, INPT, UPS, Toulouse, France



Study of axial dispersion on several modern structured and random packings

Lukáš Valenz, Patrik Šobr, Tereza Čmelíková, František Jonáš Rejl

University of Chemistry and Technology, Prague, Czech Republic



Study of the Pressure Drop and Flooding in a Rotating Packed Bed Equipped with Stainless Steel Wire-Mesh Packing

Usman GARBA1,2, David ROUZINEAU1, Michel MEYER1

1: Laboratoire de Génie Chimique - Toulouse, France; 2: Usmanu Danfodiyo University Sokoto, Nigeria



Synthesis of Alternative Intensified Sequences for the Separation of a Multicomponent Renewable Hydrocarbons Mixture

Isaac Oliva-González1, Araceli Guadalupe Romero-Izquierdo2, Claudia Gutiérrez-Antonio2, Fernando Israel Gómez-Castro1, Salvador Hernández1

1: Universidad de Guanajuato, México; 2: Universidad Autónoma de Querétaro, México



Synthesis of Double Dividing Wall Distillation Systems for the Separation of Quaternary Mixtures

Monserrat Flores-Flores1, Fernando Israel Gómez-Castro1, Araceli Guadalupe Romero-Izquierdo2, Claudia Gutiérrez-Antonio2, Massimiliano Errico3

1: Universidad de Guanajuato, Mexico; 2: Universidad Autónoma de Querétaro, Mexico; 3: University of Southern Denmark, Denmark



The development of soft sensors for continuous estimation of the distillation 95% point of diesel product

Željka Ujević Andrijić, Nenad Bolf, Srečko Herceg

University of Zagreb, Faculty of Chemical Engineering and Technology, Croatia



The Influence of Physical Properties on Structured Packing HETP Correlations

Andrew Starrantino1, Ken McCarley2, Sayeed Mohammad2, Tony Cai2, Clint Aichele1

1: School of Chemical Engineering, Oklahoma State University, Stillwater, OK 74078; 2: Fractionation Research Incorporated, Stillwater, OK 74074



The new EcoMarine #2 random packing: An innovative product for flue-gas desulfurization on marine ships

Marcus Schlager1, Verena Wolf-Zöllner1, Christian Geipel2, Christian Mehringer2, Jose Luis Sola2

1: Montanuniversität Leoben, 8700 Leoben, Austria; 2: RVT Process Equipment GmbH, 96349 Steinwiesen, Germany



Towards a better understanding of wiped film evaporators - using a modular model for fluid dynamics and heat transfer

David Appelhaus, Stefan Jahnke, Katharina Jasch, Stephan Scholl

TU Braunschweig, Germany



Troubleshooting Liquid Side Draw-off Trays

quan yang, Christian Bachmann, Peng-Cheng Hou, Sha-Li Shen, SiangHua Lee

Sulzer Chemtech



Using thermography for visualisation of liquid surface activity in mass-transfer processes

Karel Mařík, Jan Haidl, Vadim Prokopec, František Jonáš Rejl

University of Chemistry and Technology, Prague, Czech Republic



Wet-oxidative gas desulfurization under avoidance of solid sulfur precipitation

Julian Wurm1, Jens-Uwe Repke1, Olaf von Morstein2, Holger Thielert2

1: TU Berlin, Germany; 2: thyssenkrupp Industrial Solutions AG, Germany



CO2 capture from syngas by absorption process using fluorinated anion ionic liquids

AMIRI Nesrine1, BENYOUNES Hassiba2, LOUNIS Zoubida1

1: 1Laboratoire d’Ingénierie de la Sécurité Industrielle et du Développement Durable, Institut de Maintenance et de la Sécurité Industrielle, Université Oran 2, Algérie; 2: Laboratoire de chimie physique de matériaux, catalyse et environnement, Université des Sciences et de la Technologie d’Oran USTO-MB, Algérie



Conceptual design of distillation process for the separation of styrene monomer from polystyrene pyrolysis oil: experiment and simulation

Roshi Dahal1, Petri Uusi-Kyyny1, Juha-Pekka Pokki1, Ville Alopaeus1,2

1: Aalto University, School of Chemical Engineering, Department of Chemical and Metallurgical Engineering, P.O. Box 11000, FI-00076 Aalto, Finland; 2: Mid Sweden University, Department of Chemical Engineering, Sundsvall, 85170, Sweden



Feasibility of internal heat integrated dividing wall column separating methanol, ethanol, and isopropanol

Qingliang Qiao1, Haisheng Chen2, Kejin Huang3

1: Beijing University of Chemical Technology; 2: Beijing University of Chemical Technology; 3: Beijing University of Chemical Technology



Find the error - Machine Learning as a Tool for Identifying Unstable Operating Points in Thermosiphon Reboilers

David Appelhaus, Stephan Scholl, Katharina Jasch

TU Braunschweig, Germany



Smooth Penalty Function Method for Rigorous Optimization of Distillation Processes

Xingwei Liu, Shengkun Jia, Yiqing Luo, Xigang Yuan

Tianjin University, China, People's Republic of



Investigation of liquid maldistribution in a random packed column operated as a cooling tower

Thomas Winkler, Harald Klein, Sebastian Rehfeldt

Technical University of Munich, Germany



Investigations of crystallization fouling in columns

Korbinian Inderwies, Harald Klein, Sebastian Rehfeldt

Technical University of Munich, Department of Mechanical Engineering, Institute of Plant and Process Technology, Germany



Kinetics in DEEA-MAPA-H2O-CO2 systems for the post-combustion CO2 capture by absorption-regeneration using demixing solvents

Alexis COSTA, Seloua MOUHOUBI, Lionel DUBOIS, Guy DE WEIRELD, Diane THOMAS

University of Mons - Faculty of Engineering, Belgium



Liquid Holdup Distribution in Structured-Packed Columns via Gamma-Ray Computed Tomography

Alan Berger1, Patrick Houghton1, Jonathan Wilson1, Markus Schubert2, André Bieberle2

1: 1940 Air Products Blvd Allentown PA 18106 USA; 2: Helmholtz-Zentrum Dresden-Rossendorf (HZDR), Germany



Loading & Flooding in Mellapak Structured Packing: Radiographic & Computer-Tomographic Insights

Thomas Linder1, Simon Eder2, Wolfgang Arlt2, Matthias Thommes2, Ansor Gäbler1

1: Sulzer Chemtech AG, Switzerland; 2: Institute of Separation Science & Technology, Friedrich-Alexander-University Erlangen-Nürnberg, Germany



Mass-transfer model for distillation columns equipped with structured packings

František Jonáš Rejl, Tereza Čmelíková, Lukáš Valenz, Haidl Jan

University of Chemistry and Technology, Prague, Czech Republic



Measurement of vapor-liquid equilibria of ß-damascenone and simulation of its behavior during a batch distillation

Gabriela Zanghelini1, Pierre Giampaoli1, Martine Esteban-Decloux1, Stéphane Vitu1,2, Violaine Athès1

1: Université Paris-Saclay, INRAE, AgroParisTech, UMR Sayfood, 91300 Massy, France; 2: CNAM, 75003 Paris, France



Measuring tray and point efficiencies in hydraulic air/water column mockups via air-stripping of isobutyl acetate in aqueous solution

Sara Marchini1,2,3, Vineet Vishwakarma2, Markus Schubert2, Elisabetta Brunazzi3, Uwe Hampel1,2

1: Chair of Imaging Techniques in Energy and Process Engineering, Technische Universität Dresden, 01062 Dresden, Germany; 2: Institute of Fluid Dynamics, Helmholtz-Zentrum Dresden-Rossendorf, Bautzner Landstraße 400, 01328 Dresden, Germany; 3: Department of Civil and Industrial Engineering, University of Pisa, Largo Lucio Lazzarino 2, 56126 Pisa, Italy



Model based and experimental analysis of the dynamic reactive absorption loop behavior

Mike Bothe, Nicole Lutters, Eugeny Y. Kenig

Paderborn University, Chair of Fluid Process Engineering, Paderborn/Germany



Modelling of a hybrid process combining zero gravity distillation and vapour permeation

Marc Wende, Eugeny Y. Kenig

Chair of Fluid Process Engineering, Paderborn University, Paderborn, Germany



Mutual verification of the gas-phase volumetric mass-transfer coefficients determined in the packed absorption column

Lukáš Valenz, František Jonáš Rejl, Tereza Čmelíková, Martina Reisnerová, Anna Hojgrová

University of Chemistry and Technology, Prague, Czech Republic



Novel additively manufacturable structured packings developed by innovative design methods

Andreas Lange, Georg Fieg

Hamburg University of Technology, Germany



Novel Process for Levulinic Acid Production Using Reactive Distillation.

Heriberto Alcocer-García, Jose Luis Solis-Sanchez, Eduardo Sánchez-Ramírez, Ana Gabriela Romero-García, Juan Gabriel Segovia-Hernandez

Universidad de Guanajuato, Mexico



Module-based synthesis and intensification for the Acetone-Butanol-Ethanol (ABE) mixture separation

Yusaku Seki, J. Rafael Alcantara Avila

Kyoto Univeristy, Japan



A More Comprehensive Formulation to Rapidly and Reliably Screen for Energy-Efficient Distillation Configurations

Tony Joseph Mathew, Akash Sanjay Nogaja, Mohit Tawarmalani, Rakesh Agrawal

Purdue University, United States of America

6:00pm
-
7:30pm
Special event: Cocktail sponsorised by Armagnac (BNIA)

Date: Tuesday, 20/Sept/2022
8:30am
-
9:30am
Plenary_3
Location: Room 1
 

Carbon Management at BASF – Technological Pathways Towards Carbon Neutrality

Juergen Dahlhaus

BASF SE, Germany

9:30am
-
10:30am
Topic_2_A: Modelling Simulation Control
Location: Room 2
Chair: Ross Taylor, Clarkson University, United States of America
 

Development of a pressure-driven dynamic model to study the start-up of a flexible tray column

Julia Riese, Bastian Bruns, Henrik Fasel, Marcus Grünewald

Ruhr University Bochum, Germany



A numerical selection methodology for a complex periodic packing dedicated to HIDiC

Yousef Al-Maqaleh1, Nathalie Di Miceli Raimondi1, David Rouzineau1, David F. Fletcher2, Michel Meyer1

1: Laboratoire de Génie Chimique, Université de Toulouse, CNRS, INPT, UPS, Toulouse, France; 2: School of Chemical and Biomolecular Engineering, The University of Sydney, NSW, 2006, Australia

Topic_4_A: Equipment design, technology and innovation
Location: Room 1
 

Development of flexible, miniaturized test columns for scale-up of distillation processes using 3D-printing

Johannes Neukäufer1, Mohamed Adel Ashour1, Nadin Sarajlic2, Harald Klein2, Sebastian Rehfeldt2, Jürgen Pschold3, Carsten Knösche3, Thomas Grützner1

1: Ulm University, Germany; 2: Technical University of Munich, Germany; 3: BASF SE, Germany



Design and Conception of an Innovative Liquid Distributor for Separation Column

Sergio da Cunha, Benoit Mizzi, Nataliya Shcherbakova, David Rouzineau, Michel Meyer, Vincent Gerbaud

Laboratoire de Génie Chimique, Université de Toulouse, CNRS, INP, UPS, Toulouse, France

10:30am
-
11:00am
Coffee break3: Sponsored by Freyssinet
11:00am
-
12:40pm
Topic_2_B: Modelling Simulation Control
Location: Room 2
Chair: Mirko Skiborowski, Hamburg University of Technology, Germany
 

Study By Simulation Of The Behavior Of Aroma Compounds during Malt Whisky Distillation With A Stupfler Type Filling Column.

Martine ESTEBAN-DECLOUX1, N'Guessan Romaric TANO1, H. GRANGEON2

1: UMR 782 SayFood, AgroParisTech-INRAE, Paris-Saclay University, France; 2: Ergaster distillery. 1 av du Parc F 60400 PASSEL



CFD-based investigation of the packing microstructure influence on droplet behavior and film flow

Christopher Dechert, Eugeny Kenig

Paderborn University, Germany



Modeling distillation columns for practical purposes

Christoph Ehlers, Niklas Paul, Armin Rix, Philip Zitzewitz, Christoph Hiller

Evonik Operations GmbH, Germany



Pressure-driven, dynamic modeling of distillation columns using smooth reformulations to describe startup, shutdown, and flexible operation

Christian Hoffmann, Jens-Uwe Repke

Technische Universität Berlin, Germany

Topic_4_B: Equipment design, technology and innovation
Location: Room 1
Chair: Marc Wehrli, Sulzer Chemtech Ltd, Switzerland
 

C3 Splitter Revamp to Improve Separation Efficiency and Capacity

Senthil Krishnamoorthy1, Shashank Laturkar2, Vinit Kale3, Daniel R. Summers4, Dipak Shahare5, Mohammad Ahmad Khawdah5, Mohammed Ali Al-Sekhan6, Mahesh Kumar S6, Misfer Al Ghamdi7, Andrei Merenov8

1: Sulzer Chemtech, USA; 2: Sulzer Chemtech, India; 3: Sulzer Chemtech, Bahrain; 4: Retired from Sulzer USA; 5: Saudi Kayan, SABIC; 6: Global Cracker Technology, SABIC; 7: Process Safety, SABIC; 8: Engineering Science, SABIC



More than just Thermodynamics, mechanical design of dividing wall columns – best practice experiences

Robin Schulz

Julius Montz GmbH, Germany



The Development and Applications of a New Mass Transfer Tray Device

Neil Sandford1, Greg Spencer2, Alessandro Ferrari3

1: Koch Engineered Solutions, United States of America; 2: Koch Engineered Solutions Limited, UK; 3: Koch Engineered Solutions, Italy



Visualization of recirculation zones over a perforated plate: An optical flow technique for characterization of fluid dynamics in structured packing

Manasa Iyer1, John Pachón-Morales1, Joel Casalinho2, Jacopo Seiwert1, Mikael Wattiau1, Laurent Zimmer3, Hervé Duval2

1: Air Liquide Research and Development, 1 Chemin de la Porte des Loges, Les-Loges-en-Josas 78350, France; 2: LGPM, CentraleSupélec, Université Paris-Saclay, 3 rue Joliot-Curie, 91192 Gif-sur-Yvette, France; 3: EM2C, CentraleSupélec, Université Paris-Saclay, 3 rue Joliot-Curie, 91192 Gif-sur-Yvette, France

12:40pm
-
2:00pm
lunch2
2:00pm
-
3:00pm
Plenary_4
Location: Room 1
Chair: Elisabetta Brunazzi, University of Pisa, Italy
 

100 Years of Distillation with Trays and Packings and Beyond

Michael Schultes1, Daniel R. Summers2

1: Raschig GmbH, Allemagne; 2: Sulzer Chemtech USA, Inc. (retired)

3:00pm
-
4:15pm
Topic_2_C: Modelling Simulation Control
Location: Room 2
Chair: Regina Benfer, BASF SE, Germany
 

Rate-based Column Design – The Need to Know

Richard Behrens, Michael Haas, Friedemann Gaitzsch

BASF SE, Germany



Digitalization of a Coker Fractionator Using TOWER VIEW® software

Anand N Vennavelli, Izak Nieuwoudt

Koch-Glitsch, United States of America



Rate-Based Column Simulation in the Complex Domain

Jaeide Jawahill, Ross Taylor

Clarkson University, United States of America

Topic_4_C: Equipment design, technology and innovation
Location: Room 1
Chair: Izak Nieuwoudt, Koch Engineered Solutions, United States of America
 

Intensifying Modular Carbon Capture

David Bahr1, James Hall1, Thomas Yelland1, Jonathan Lee2, Kai Groß3, Robin Schulz3

1: Carbon Clean, 3 Valentine Place, London, SE1 8QH, U.K.; 2: School of Engineering, Newcastle University, Newcastle upon Tyne, NE1 7RU, U.K.; 3: Julius Montz GmbH, Hilden, Germany



Characterization of the operating limits of a two-staged rotating packed bed

Tobias Pyka, Katharina Kohl, Jörg Koop, Christoph Held, Gerhard Schembecker

TU Dortmund, Germany



New temperature measurement methodology for a comprehensive understanding of rotating packed beds in distillation processes

Alexander Ressemann, Markus Illner, Jens-Uwe Repke

TU Berlin, Germany

4:15pm
-
4:45pm
Coffee break4
4:45pm
-
6:00pm
Topic_2_D: Modelling Simulation Control
Location: Room 2
Chair: Ville Alopaeus, Aalto Univesity, Finland
 

Hybrid Modeling Approaches for Air Separation Unit Control Applications

Valentin Krespach1, Nicolas Blum1,2, Martin Pottmann2, Sebastian Rehfeldt1, Harald Klein1

1: Technical University of Munich, TUM School of Engineering and Design, Department of Energy and Process Engineering, Institute of Plant and Process Technology, Boltzmannstraße 15, 85748 Garching (Germany); 2: Linde GmbH, Linde Engineering, Dr.-Carl-von-Linde-Straße 6-14, 82049 Pullach (Germany)



Numerical simulation of the two-phase flow at a single trapezoid fixed valve using a hybrid CFD approach

Philipp Wiedemann1, Sesi Preetam Kota1, Stephanie Weckesser1, Eckhard Schleicher1, Markus Schubert1, Uwe Hampel1,2

1: Helmholtz-Zentrum Dresden-Rossendorf, Germany; 2: Technische Universität Dresden, Germany



Opimisation of a Batch Distillation Process by Applying Surrogate Models

Laszlo Hegely, Marton Tamas Szucs, Ömer Faruk Karaman, Peter Lang

Budapest University of Technology and Economics, Department of Building Services and Process Engineering, Hungary

Topic_4_D: Equipment design, technology and innovation
Location: Room 1
Chair: Mohammad Kalbassi, Brunel University London, United Kingdom
 

Recent developments in separation equipment for very large distillation and absorption towers

Mario Roza, Mark Pilling, Christian Bachmann

Sulzer, Switzerland



High Pressure CO2 Distillation Columns with Structured Packing – from Concept to Successful Column Operation

André Perschmann, Mariyana Chalakova, Annett Kutzschbach

Linde Engineering / Linde GmbH, Germany



Why NOT Structured Packings in High-Pressure Distillation Applications?

Jose Bravo1, Tony Cai2

1: Independent Consultant; 2: Fractionation Research, Inc., United States of America

7:30pm
-
11:00pm
Gala dinner: Sponsored by Sulzer
Hôtel Dieu - Rue Viguerie TOULOUSE

Date: Wednesday, 21/Sept/2022
8:30am
-
9:30am
Plenary_5
Location: Room 1
Chair: Igor Dejanovic, University of Zagreb, Faculty of Chemical Engineering and Technology, Croatia
 

From 2 tons per hour to 2 tons per second of oxygen

Bernard Saulnier, mikael Wattiau

Air Liquide, France

9:30am
-
10:30am
Topic_1_A: Basic Data
Location: Room 1
Chair: Ljudmila Fele Zilnik, National Institute of Chemistry, Slovenia
 

Entrainer selection for the extractive distillation of acrylic acid and propionic acid

Hilbert Keestra, Thomas Brouwer, Boelo Schuur, Jean-Paul Lange

University of Twente



Carbon dioxide capture with choline-based DESs solvents

Gabriela CIRIACO, Alain LEDOUX, Lionel ESTEL

LABORATOIRE DE SÉCURITÉ DES PROCÉDÉS CHIMIQUES, France

Topic_3_A: Hybrid and multifunctional processes
Location: Room 2
Chair: Oleg Pajalic, Perstorp AB, Sweden
 

High-level decision-making approach for early assessment of the applicability of advanced reactive distillation technologies

Isabel Pazmiño-Mayorga, Anton A. Kiss, Megan Jobson

University of Manchester, United Kingdom



Upscale of reactive-transport phenomena in catalytic distillation units

Oscar Luevano1, Juan José Quiroz-Ramirez1, V. Alejandro Suarez-Toriello1, Eduardo Sánchez-Ramirez2, Juan Gabriel Segovia-Hernández2

1: CONACYT-CIATEC A.C., Centro de Innovación Aplicada en Tecnologías Competitivas; 2: Department of Chemical Engineering University of Guanajuato

10:30am
-
11:00am
Coffee break5: Sponsored by FRI
11:00am
-
12:00pm
Topic_1_B: Basic Data
Location: Room 1
Chair: Jens Abildskov, Technical University of Denmark, Denmark
 

The unexpected weirdness of rate-based simulation of some high-pressure column operations

Attilio Praderio, Ruan de Villiers, Jingsong Zhou, Hendrik A. Kooijman, Ross Taylor

Clarkson University, United States of America



Thermographical determination of the effective mass transfer area of distillation

František Jonáš Rejl, Jan Haidl, Karel Mařík, Tereza Čmelíková, Lukáš Valenz

University of Chemistry and Technology, Prague, Czech Republic



Measuring local condensation heat transfer coefficients in cryogenic conditions.

Marie-Adélaïde Crémieux1, Jacopo Seiwert1, Brice Tréméac2, Florine Giraud2, Frédéric Crayssac1

1: Air Liquide Research and Development, 1 Chemin de la Porte des Loges, Les-Loges-en-Josas 78350, France; 2: Lafset - Laboratoire du froid et des systèmes énergétiques et thermiques, CNAM, Paris

Topic_3_B: Hybrid and multifunctional processes
Location: Room 2
Chair: Boelo Schuur, University of Twente, Netherlands, The
 

Investigation of an innovative control method for cyclic operation of reactive distillation columns

Innokentij Bogatykh1, Markus Illner1, Christian Hoffmann1, Volodymyr Kozachynskyi1, Thomas Osterland2, Thomas Wilharm3, Jens-Uwe Repke1

1: Technical University of Berlin; 2: Augsburg University of Applied Sciences; 3: ASG Analytik-Service AG



Black liquor valorization via reactive distillation and heterogeneous catalysis

Laura REYES, Clémence NIKITINE, Léa VILCOCQ, Pascal FONGARLAND

CP2M (Catalyse, Polymérisation, Procédés et Matériaux), France



Optimal design of hybrid dividing wall columns for azeotropic separations

Eva Sorensen, Dian Chia, Fanyi Duanmu

University College London (UCL)

12:00pm
-
12:40pm
PhD Award: Sponsored by BASF
12:40pm
-
1:00pm
Closure ceremony
1:00pm
-
2:00pm
lunch3