External publications where SSIIM has been used

External publications where SSIIM has been used

Baranya, S. and Jozsa, J. (2009) “Morphological modeling of a sand-bed reach in the Hungarian Danube”, Proceedings of the 33rd Congress of the International Association of Hydraulic Engineering and Research, Vancouver, Canada.

Baranya, S. and Jozsa, J. (2007) "Numerical and laboratory investigation of the hydrodynamic complexity of a river confluence", Periodica Polytechnica, Civil Engineering, Vol. 51, No. 1, pp. 3-8.

Baranya, S. and Jozsa, J. (2007) "Comparative CFD and scale model analysis of the flow complexity at a river confluence", 32nd Congress of IAHR, July 1-6 2007, Venice, Italy.

Booker, D. J., Dunbar, M. J. and Ibbotson, A. (2004) "Predicting juvenile salmonid drift-feeding habitat quality using a three-dimensional hydraulic-bioenergetic model", Ecological Modelling, 177 (1-2): pp. 157-177.

Booker, D. J. (2003) "Hydraulic modelling of fish habitat in urban rivers during high flows" Hydrological Processes, 17 (3): pp 577-599.

Booker, D.J., Sear, D.A. and Payne, A.J. (2001) "Modelling three-dimensional flow structures and patterns of boundary shear stress in a natural pool-riffle sequence", Earth Surface Processes and Landforms, Vol. 26, No. 5, May, page 553-576

Booker, D. J. (2000) "Modelling and monitoring sediment transport in pool-riffle sequences", PhD thesis, Department of Geography, University of Southampton, UK.

Bowles, C., Daffern, C. D. and Ashforth-Frost, S. (1998) "The Indipendent Validation of SSIIM - a 3D Numerical Model", HYDROINFORMATICS '98, Copenhagen, Denmark.

Bowles, CB. Daffern C and Ashforth-Frost S. (1998) "An investigation into the flow field at a generalised intake structure using SSIIM: a 3D numerical model" Proc. ASCE International Water Resources Engineering Conference, Memphis, USA, 3-7 August, Vol. 2, pp 1114-1119.

Clifford, N.J., Soar, P.J., Harmar, O.P., Gurnell, A.M., Petts, G.E. and Emery, J.C. (2005), "Assessment of hydrodynamic simulation results for eco-hydraulic and eco-hydrological applications: a spatial semivariance approach", Hydrological Processes, Volume: 19 Issue: 18 pp. 3631-3648.

Conway, P., O'Sullivan, J. J. and Lambert, M. F. (2013) "Stage-discharge prediction in straight compound channels using 3D numerical models", Water Management, Vol. 166, Issue 1, pp 3-15.

Daae, T. C. (1996) "Repair of flood defence of Alta River at Hoybakken and Killi", The Norwegian Water Resources and Energy Directorate, Water Resources Department, Case no: 8788. (In Norwegian)

Dehghani, A. A., Esmaeili, T., Chang, W. Y. and Dehghani, N. (2013) "3D numerical simulation of local scouring under hydrographs", Water Management, Vol. 166, Issue 3, pp 120-131.

Dordevic, D. (2013) "Numerical study of 3D flow at right-angled confluences with and without upstream planform curvature", Journal of Hydroinformatics, Vol. 15, Issue 4, pp. 1073-1088.

Dordevic, D. and Biron, P. M. (2008) "Role of upstream planform curvature at asymmetrical river confluences - laboratory experiments revisited", River Flow 2008, Vol. 3, pp. 2277-2286.

Dorfmann, C. and Knoblauch, H. (2009) “Calibration of 2D and 3D numerical models of a large reservoir using ADCP measurements”, Proceedings of the 33rd Congress of the International Association of Hydraulic Engineering and Research, Vancouver, Canada.

Haemmerling, M., Blazejewski, R. and Walczak, N. (2013) "Modeling of Local Scour in Non-cohesive Soils Below Sills Using SSIIM Computer Code", Rocznic Ochrona Srodowiska, Vol. 15, pp 538-550.

Huggins, D.L., Piedrahita, R.H. and Rumsey, T. (2004), "Analysis of sediment transport modeling using computational fluid dynamics (CFD) for aquaculture raceways", Aquacultural Engineering, Vol. 31, pp. 277-293.

Kang, H. (2013) "Flow Characteristics and Morphological Changes in Open-Channel Flows with Alternate Vegetation Zones", KSCE Journal of Civil Engineering, 17(5), pp 1157-1165.

Kim, D., Stoesser, T. and Kim, J-H. (2013) "Modeling aspects of flow and solute transport simulations in water disinfection tanks", Applied Mathematical Modelling, 37, pp 8039–8050.

Minor, B., Rennie, C. D. and Townsend, R. D. (2007) ""Barbs" for river bend bank protection: application of a three-dimensional numerical model", Canadian Journal of Civil Engineering, Vol. 34, pp. 1087-1095.

Mohamed, H. I. (2013) "An investigation of turbulent accelerated flow along smooth prismatic chutes", Water and Environment Journal, Vol. 27. Issue 1, pp. 71-78.

Naden, P., Rameshwaran, P., Wilson, C. A. M. E., Malki, R., Shukla, D. R. and Shiono, K. (2006) "Inter-comparison of CFD codes using data from a large-scale physical model", IAHR/IWA International Conference on Hydroinformatics, Nice, France, Theme 1D3-4

Perez, S. and Caliendo, W. (2008) "Calculating marine propeller scour using SSIIM CFD software", Journal of Marine Environmental Engineering, Vol. 9, No. 1, pp. 75-84.

Rameshwaran, P., Naden, P., Wilson, C. A. M. E., Malki, R., Shukla, D. R. and Shiono, K. (2013) "Inter-comparison and validation of computational fluid dynamics codes in two-stage meandering channel flows", Applied Mathematical Modelling, (37) pp 8652–8672.

Seed, D. (1997) "River training and channel protection - Validation of a 3D numerical model", Report SR 480, HR Wallingford, UK.

Shakibainia, A., Tabatabai, M. R. M. and Zarrati, A. R. (2010) "Three-dimensional numerical study of flow structure in channel confluences", Canadian Journal of Civil Engineering, Vol. 37, Issue 5, pp 772-781.

Sintic, A. (1996) "Numerical models for dam-break flood routing", MS Thesis, Institute of Hydraulic Engineering and Water Resources Management, University of Technolgy, Aachen, Germany.

Sokoray-Varga B., Baranya S. and Jozsa J. (2006): "Turbulence analysis of vertical slot fish pass by in situ measurements and CFD modelling', Third International Conference on Fluvial Hydraulics, River Flow 2006, Lisbon, Portugal.

Sokoray-Varga, B., Baranya, S. and Jozsa, J. (2007) "Turbulent strucutures in vertical slot fish pass revealed by in situ measurements and numerical modelling", Fifth International Symposium on Environmental Hydraulics (ISEH V). Tempe, Arizona.

Stoesser, T. (1998) "Numerical Modelling as Tool in Hydraulics - In Case of Reservoir Sedimentation Processes in Mountainous Regions", M.Sc. Thesis, Institute of Hydraulic Engineering and Water Resources Mangagement, University of Karlsruhe, Germany.

Tritthart, M. and Gutknecht, D. (2007) "3-D computation of flood processes in sharp river bends", Proceedings of the Institution of Civil Engineers - Water Management, Vol. 160, Issue 4, pp. 233-247.

Wilson, C. A. M. E. (2000) "SSIIM: Sediment Simulation In Intakes with Multiblock option. A model for free surface flows. A 3D model for the prediction of hydraulic and water quality parameters in free surface flow", Hydrological Processes, Vol. 14, pp. 2619-2622.

Wilson, C. A. M. E., Yagci, O., Rauch, H.-P. and Stoesser, T. (2006) "Application of the drag force approach to model the flow-interaction of natural vegetation", Journal of River Basin Management, Vol. 4, No. 2, pp. 137–146.

Wormleaton, P. R. and Ewunetu, M. (2006) "Three-dimensional k-epsilon numerical modeling of overbank flow in a mobile bed meandering channel with floodplains of different depth, roughness and planform", Journal of Hydraulic Research, vol. 44, Issue 1, pp. 18-32.

Zinke, P. and Bogen, J. (2013) "Effect of water level regulation on gradients and levee deposits in the Lake Oyeren delta, Norway", Hydrology Research, Vol. 44, Issue 1, pp. 523-537.